Bedienungsanleitung Schwinn A10 (Seite 24 von 28) (Englisch)

671374

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

TROUBLESHOOTINg

Condition/Problem Things to Check Solution

No display/partial display/

unit will not turn on

If bike has AC adapter, check

electrical (wall) outlet

Make sure unit is plugged into a functioning wall outlet.

If bike has AC adapter, check

connection at unit

Connection should be secure and undamaged. Replace

adapter or connection at unit if either are damaged.

If bike has batteries, check

Battery Indicator on console

or check batteries.

Replace the batteries. It may be necessary to replace the

batteries although the Battery Indicator is not on.

Check data cable integrity All wires in cable should be intact. If any are visibly crimped

or cut, replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into

place.

Check console display for

damage

Check for visual sign that console display is cracked or

otherwise damaged. Replace Console if damaged.

ConsoleDisplay If Console only has partial display and all connections are

ﬁne, replace the Console.

If the above steps do not resolve the problem, contact

Customer Care for further assistance.

Unit operates but Contact

HR not displayed

HR cable connection at

Console

Be sure cable is connected securely to Console.

Sensor grip Be sure hands are centered on HR sensors. Hands must

be kept still with relatively equal pressure applied to each

side.

Dryorcallousedhands Sensors may have difﬁculty with dried out or calloused

hands. A conductive electrode cream (heart rate cream)

can help make better conduct. This is available on the web

or at medical or some larger ﬁtness stores.

Handlebars If tests reveal no other issues, Handlebars should be

replaced.

Console displays “E2” error

code

Check data cable integrity All wires in cable should be intact. If any are cut or

crimped, replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into

place.

Console electronics If tests reveal no other issues, Console should be replaced.

No speed/RPM reading,

Console displays “E3” error

code

Check data cable integrity All wires in cable should be intact. If any are cut or

crimped, replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into

place.

Check magnet position

(requires shroud removal)

Magnet should be in place on pulley.

Check RPM Sensor (requires

shroud removal)

RPM sensor should be aligned with magnet and

connected to data cable. Realign sensor if necessary.

Replace if there is any damage to the sensor or the

connecting wire.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schwinn A10 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Schwinn A10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info