Bedienungsanleitung Schwinn AD6 (Seite 24 von 28) (Englisch)

737329

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

TROUBLESHOOTING

Condition/Problem Things to Check Solution

Console will not power up/

turn on/start

Batteries Make sure batteries are installed correctly. If batteries are

correctly installed, replace with a set of new batteries.

Check data cable integrity All wires in cable should be intact. If any are visibly crimped or

cut, replace cable.

Check data cable

connections/orientation

Make sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Check console display for

damage

Check for visual sign that console display is cracked or

otherwise damaged. Replace Console if damaged.

If the above steps do not resolve the problem, contact your

local Schwinn

™

distributor.

Speed displayed is not

accurate

Display set to wrong unit

ofmeasure.(English/

Metric)

Changedisplayunits(consult“ConsoleServiceMode”)

Speed displayed is always

“0”/stuckinPausemode

Data cable Make sure the data cable is connected to the back of the

Console and the main frame assembly.

SpeedSensor(under

Shrouds)

Make sure the Speed Sensor Magnet and the Speed Sensor

are in place.

No speed/RPM reading Check data cable integrity All wires in cable should be intact. If any are cut or crimped,

replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Check Speed Sensor

Magnetposition(requires

shroudremoval)

Magnet should be in place on pulley.

Check Speed Sensor As-

sembly(requiresshroud

removal)

Speed Sensor Assembly should be aligned with magnet and

connected to data cable. Realign sensor if necessary. Replace

if there is any damage to the sensor or the connecting wire.

Consoledisplays“Lbatt”

error code

Batteries Replace batteries

Unit operates but Tele-

metric Heart Rate not

displayed

ChestStrap(optional) Strap should be “POLAR

™

”compatibleanduncoded.Make

sure strap is directly against skin and contact area is wet.

Chest Strap Batteries If strap has replaceable batteries, install new batteries.

Interference Trymovingunitawayfromsourcesofinterference(TV,Micro-

wave,etc).

Replace Chest Strap If interference is eliminated and HR does not function, replace

strap.

Replace Console If HR still does not function, replace Console.

Consoleshutsoff(enters

sleepmode)whileinuse

Check data cable integrity All wires in the cable should be intact. If any are cut or crimped,

replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into

place.

Check Speed Sensor

Magnetposition(requires

shroudremoval)

Speed Sensor Magnet should be in place on pulley.

Check Speed Sensor As-

sembly

Contact your local Schwinn

™

distributor.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schwinn AD6 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Schwinn AD6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info