Bedienungsanleitung Scott BMX - 2015 (Seite 7 von 13) (Englisch)

664168

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

BMX | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 | BMX

ENGLISH

USE OF A BABY SEAT

SCOTT bikes such as Racing Concept, Racing, Endurance, Progressive, Road,

Roadster and Kids Series are not intended to be used with baby seats.

Please note that SCOTT will not take any warranty or responsibility when using a

baby seat on bikes mentioned above.

There are too many different baby seat and baby seat fixation systems on the market

to give a detailed table of systems that might fit without technical problems or

endangering the passengers.

ASSIGNMENT OF BRAKE LEVERS TO FRONT AND REAR BRAKE

In general SCOTT bikes are delivered and preassembled with the right lever

matching the rear brake and the left lever matching the front brake.

Due to national laws this may have been changed by your SCOTT dealer to fulfil the

national laws.

Please ask your dealer to explain to you the assignment of the brakes and brake

levers when handing over the bike.

MAXIMUM WEIGHT AND LOAD OF SCOTT BIKES

SCOTT mountain bikes are intended for a maximum rider weight of 110 kgs, the

overall weight of bike including rider should not exceed 119‑128kgs (depending on

bike weight).

SCOTT trekking bikes are intended for a maximum rider weight of 110 kgs, the

overall weight of bike including rider and a maximum load of 25kgs should not

exceed 143‑150kgs (depending on bike weight).

SCOTT road bikes are intended for a maximum rider weight of 110 kgs, the overall

weight of bike including rider should not exceed 117‑120kgs (depending on bike

weight).

SCOTT kids bikes are intended for a maximum load of 50 kgs including rider

and load.

Please always follow the information of the component suppliers regarding the

maximum rider weight.

USE OF SCOTT BIKES IN PUBLIC TRAFFIC

Please follow the national laws concerning the use of equipped and non‑equipped

bikes in public traffic. For example, reflectors and light systems.

MAINTENANCE AND CARE

MAINTENANCE SCHEDULE

Please be aware that you must follow the list of maximum tightening torques for

screws at the end of this chapter.

CHECK BEFORE EVERY RIDE:

‑ All bolts and nuts, especially the quick releases of the wheels for proper fit. If they

are loose tighten them according to the maximum tightening torque.

‑ Stem and handlebar for visible damage and replace them if necessary. Ensure

that the bolts are tightened evenly when closing the front cap according to the

tightening torque recommended by the producer of the parts.

‑ Braking systems.

‑ Air pressure of the tires according to the recommendation of the producer.

‑ Light systems and bell.

‑ Handlebar grips to be fixed to the handlebar.

‑ All parts of the rear suspension system including mounting bolts.

‑ The front suspension fork on perfect function and play in the bushings.

CHECK ADDITIONALLY EVERY MONTH

‑ Front and rear derailleur for perfect function and grease them. Readjust the

system and clean it if necessary.

‑ The play of the headset. Readjust it if necessary.

‑ Brake and shifting cables on perfect wear and leakage on hydraulic systems.

Grease the cables if necessary.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scott BMX - 2015 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scott BMX - 2015

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info