1. Be sure to connect the color-coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or
damage the vehicle’s electrical system.
2. Be sure to connect the speaker leads to the speaker terminal using the correct polarity. Never connect the left and right channel
speaker cables to each other or to a metal part of the vehicle.
3. Make sure all the connections are correct before turning on your unit.
4. When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder.
5. Do not block vents or radiator panels. Blocking them will cause heat to build up inside and may result in fire.
6. Do not use the unit for too long after the car has stopped in order to avoid using up the electric energy of the car battery.
7. Keep the unit away from direct sunlight.
8. Do not expose the unit to extreme temperatures, and avoid humidity and direct sunlight. Ensure that that the temperature inside
the vehicle is between –10°C and +60°C.
9. Be careful of the unit’s magnetic field. Do no put the credit cards, cassettes or watches around the unit, or they may break or lose
some information.
10. In order to avoid interference, stay away from the unit when using a mobile phone.
11. Do not expose the remote control to high temperatures or direct sunlight as this may cause it to malfunction.
GB-3
About this manual
This unit features a number of sophisticated functions ensuring superior operation. All the functions have been designed for the easiest
possible use, but many are not self-explanatory. This manual will help you understand the functions and operations of the unit. This manual
mainly explains remote control operation. However, in addition to those functions related to DVD/VCD/CD/MP3/MP4 operation that can
only be operated by the remote control, there are also functions that can be operated by the buttons on the main unit.
PRECAUTIONS
This unit can play the following discs and formats only:
Type of disc Label on the disc
Recorded material
Size of disc
DVD
Sound and Video
12cm
VCD
Sound and Video
12 cm
CD
Sound only
12 cm
MP3
Sound only
12 cm
MP4
Sound and Video
12 cm
NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVD disc.
GB-4
MPEG-4
REL
Note:
Never put any objects between the main unit and the front panel
DETACHING THE FRONT PANEL
Press
RELEASE button in the upper right hand corner, and then the front panel will be folded down.
When the front panel is turned down to a position of 90°, hold and slide the front panel to right, and then pull it out.
INSTALLATION OF THE UNIT
Take Out Screws Before Installation
Before install the unit, must remove the two screws with label “WARNING”.
Installation Method : DIN Front-Mount
Precautions
•Choose the location of the unit carefully so that the unit does not hinder the normal functioning of the vehicle.
•Before installing the unit, make sure that the front panel can move freely and can be easily removed.
•Do not install the unit in a location where it could be exposed to high temperatures, to direct sunlight, to hot air from the
heating system, to dust, dirt or excessive vibrations.
•For successful installation, only use equipment intended for this purpose.
•Be sure to remove the front panel before installing the unit.
•In order to avoid certain problems relating to disc playback, the unit must be installed at an angle of less than 30°.
GB-6
Fire wall
To support the uni
t
Bend these claws
outward for a tight
fit, if necessary.
After inserting the mounting bracket in the dashboard (1), select the appropriate claws according to the width of the dashboard and bend the
claws outward in order to keep the rack as shown in the diagram (2). Plug in the connectors (please see page 10) and insert the car radio into the rack.
Put the outer trim frame as shown in the diagram (4). If necessary, use the metal assembly bar, rear mounting bolt with its screw guider.
GB-7
Removing the Unit
Detach the front panel before removing the unit. For more details, refer to
“DETACHING THE FRONT PANEL”.
1.Take out the Outer Trim Frame after detaching the front panel.
2. Insert the keys supplied into the unit at both sides of the unit (shown as illustrated) until they click.
Pulling the keys makes it possible to remove the unit from the dashboard.
Cleaning the Connector
If the connector is dirty, it may result in the unit not working properly. To avoid such problem happening, please detach the front
panel, and clean the connector with an alcohol swab. Gently clean the connector and avoid damaging it.
The main unit
The backside of the front panel
Notes
•
For security reasons, always shut down the engine and remove the key from the ignition before cleaning.
•
Never let your finger or any metal device touch the connector directly.
GB-8
4.Wiring Connection
Note:
* The brown wire is connected to the handbrake signal; for safety, the
programs
and MP3 navigation menu can be seen on the monitor after the
handbrake is activated,
but the menu and RCA output do not have this
constraint.
* If you do not want to use this function, connect it to the negative pole.
L white
R red
L white
R red
L white
R red
Antenna
Audio Out Front
(Dark Grey)
Black
Audio Out Front
Output Socket (Female)
Video Out
Grey
Yellow
Video In
Subwoofer Out
Black
Yellow
Audio Out Rear
Output Plug (Male)
Audio Out Rear
(Light Grey)
Brown
Brown
Antenna Receptacle
Subwoofer
AUX In
Black
Video Out
Video In
AUX In
Grey
Grey/Black
Violet
Violet/Black
Blue
Brown
Front R
Speaker
Rear R
Speaker
To power
Antenna
Braking Signal
Ignition Key
Memory Back-up12V
Negative Ground
Rear L
Speaker
Front L
Speaker
Red
Yellow
Choke
GB-9
Box
White/Black
White
Black
Green/Black
Green
Many vehicles are pre-fitted with ISO connectors behind the dashboard, including all the electrical cabling for a car radio. In such cases, the
connections fitted to the vehicle can be directly plugged into the car radio connectors. Should your car not be pre-fitted with these connectors,
we strongly advise you to obtain the ISO wiring loom fitted with the male connector for connection to your car radio either from a specialist
shop or from the car dealer for your vehicle. Once obtained, you will only need to connect your loudspeakers and the power supply to the ISO
connector, following the connection instructions below.
Power Supply Connector
1.Battery (yellow)
Speaker Connector
Power Supply Connector
5. Speaker Connector 10.Front left speaker + (white)
6.Rear right speaker + (violet) 11.Front left speaker – (white/black)
2.Ground (black) 7.Rear right speaker - (violet/black) 12.Rear left speaker + (green)
3.Power +12 volt (red) 8.Front right speaker + (grey)
13.Rear left speaker – (green/black)
4. Electrical Antenna (blue)
9.Front right speaker – (grey/black)
1)Make sure your car battery is a 12 volt (6 filter caps) negative ground system (if not, a converter will be necessary).
2)Before starting wiring connections, disconnect the power supply by removing the fuse from the fuse holder.
3)Connect the power wire to one of the extra terminal of the car.
4)Connect the black ground wire to a metal part of the car. It is important to make good contact.
5)Make other wiring connections as shown.
6)Connect the battery of the car.
7)Replace the fuse holder of the unit.
NOTE IN CORRECT WIRING OR OPERATION WILL VOID THE WARRANTY OF THIS UNIT.
GB-10
Replacing the Fuse
Make sure the amperage matches the specified value when replacing the fuses. If the fuse is blown, check the power connection and replace
with a new one. If the same problem occurs, there must be a malfunction. In such cases, please consult the nearest repairs center.
Warning:
Never use the fuse with a rated amperage over the one specified, otherwise you risk damaging the unit.
Replacing the Battery
When the operation range of the remote control becomes short or if it no longer works, replace the lithium battery with a new button cell
(CR2025). Make sure the battery polarities match before replacing it.
Gently pull out the battery holder
whilst pressing the side
Put the button-type battery with
The + facing upward into the
battery holder.
Insert the battery holder into the
remote control.
Warning:
Improper handling of the battery may
lead to explosion. Do not charge,
disassemble or throw the battery into
a fire.
Precautions on Using Lithium Batteries
Always keep the lithium battery out of the reach of children. If it is swallowed, see a doctor immediately. In order to ensure optimum
performance, clean the battery with a dry cloth.
Make sure that the polarities are correct when loading the battery. To prevent short circuits, do not use metal tweezers to insert the battery.
GB-11
5. Maintenance
⑹ AMS(RPT) button
During radio mode, briefly press it and use /buttonsto select the preset
station number to save current frequency; press and hold it to memorize stations
automatically.
During playback, press it to activate the repeat play function.
⑺ Remote Infrared Sensor
⑻ BND/
button
During radio mode, press it to select different bands.
During playback, press it to pause or resume playback.
⑼ MOD/MUT button
Briefly press it to select the mode: RADIO , DVD, AUX IN; Hold and press it to
mute the sound output.
⑽ RESET button
Press to reset the unit to default settings.
⑾ EQ/AF button
⑴ PWR button
Briefly press it to select the alternative frequency; press and hold it to select the EQ
preset mode: POP, CLASSIC and ROCK.
Press PWR to turn on the unit, press it again to go to standby mode.
⑵ RELEASE button
⑿ / button
Press to do manual tuning or go to next/ previous track/ chapter.
Press it to release the front panel.
⒀
EJECT button
⑶ MENU-VOL button
Press it to eject the disc.
Rotate clockwise to increase the volume level; and rotate
⒁ LOC button
During radio mode, press it to select the distant or local station.
anticlockwise to decrease the volume level. Press it repeatedly to set the sound effects;
press and hold it to show the system menu; rotate it to set the item and then press to
enter.
⒂ LOU/TA button
Briefly press it to activate the traffic alarm function; press and hold it to activate the
loudness function
⑷ LCD (LIQUID CRYSTAL DISPLAY)
⒃Disc Loading Slot
To display current status and also used to view movies.
⑸ USB Port
GB-12
6. Description of functions
11.On Screen Display
In DVD mode, press the OSD button (8) on the remote control to display the following information:
Hold down the OSD button (8) to display the source and setup information.
Note:
* This function can only be operated by using the remote control.
12.DVD Options
In DVD mode, press GOTO button (2) on the remote control to set the playing time and the following options will be displayed:
title/chapter/sound/captions/angle/title time/chapter time/repeat playing/time. Use the and buttons to select the options, press
ENTER to confirm. Then press the number buttons (23) or and buttons (27) to set the current status.
Note:
* This function is operated by using the remote control.
13.Changing the viewing angle (Multi-angle)
With DVDs featuring multi-angle (scenes shot from multiple angles) recordings, press the ANGLE button to switch between viewing
angles during playback.
The viewing angle changes in the following order: ANGLE 1 – ANGLE 2 – ANGLE 3
Note:
* This function is operated by using the remote control.
* This function is only available with DVDs featuring multi-angle recordings.
* The“
”symbol on a DVD packaging indicates that it features multi-angle scenes. The number in the symbol indicates the number of angles
from which scenes were shot..
* The ANGLE button does not function during fast forward/fast rewind or pause.
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Scott drx 600 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.