Bedienungsanleitung Scott Road Bikes - 2017 (Seite 43 von 64) (Englisch)

664145

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISHENGLISH

85 |

ROAD BIKE | OWNER’S MANUAL 2017OWNER’S MANUAL 2017 | ROAD BIKE

| 84

If you have disc brakes, check before mounting the wheel whether the brake

pads rest snugly in their seats in the brake calliper body. The gaps between the

brake pads and the wheel should be parallel and the wear indicators in their cor-

rect position. Make sure you guide the rotor carefully between the brake pads.

After mounting the wheel and tightening the quick-release pull the brake lever

(several times, if you have disc brakes).

All brakes:

After mounting the wheel and tightening the quick-release pull the brake lever

(e) (several times, if you have disc brakes).

Lift your SCOTT bike off the ground and spin the wheel with your hand. With

the wheel spinning the rotor should not drag along the brake calliper or the

brake pads and the rim should keep off the (rim) brake pads.

DANGER!

If you have rim brakes, make sure you hook up the brake cable immediately

after the wheel mounting!

DANGER!

Before setting off again check that the brake surfaces and/or rotors are still

free of grease or other lubricants after the wheel mounting (f).

DANGER!

Check whether the brake pads hit the rotors or brake surfaces of the rims.

Make sure the wheel is properly seated and ﬁrmly ﬁxed in the drop-outs. Al-

ways do a brake test as described in the chapter “Tests before every ride“.

NOTE!

When mounting a tyre on a rim that has already been used, it may be

necessary to carefully remove glue residues and dirt with emery cloth. Be

careful not to damage the carbon material. When you are done, wipe the rim

with a soft cloth and acetone.

NOTE!

Before removing a wheel, read the chapters “Wheels and tyres” and “Using

quick-releases and thru axles”.

NOTE!

If your bike has carbon rims, you have to use special tubular tyre glue (e.g.

from Continental). Be sure to read the manual of the manufacturer of tubu-

lar tyre glue for carbon rims on this SCOTT info CD before applying it.

NOTE!

See the video on how to properly glue Continental tubular tyres at

www.conti-online.com

REMOUNTING THE WHEEL

Mounting the wheel is done in the reverse order of dismounting. If necessary,

insert the brake discs between the brake pads. Make sure the wheel is correctly

seated in the drop-outs and accurately centred between the fork legs or the

seat and chainstays. Make sure the quick-release and the drop-out safety tabs

are correctly seated. For more information see the chapter “Using quick-releas-

es and thru axles”.

Close the quick-release lever at the brake (Shimano, SRAM) (a) or shift the pin

in the brake lever/shifter unit on the handlebars (Campagnolo) (b).

If you have cantilever (c) and V-brakes (d) hook up the brake cable at the brake

arm. To do this, grip the rim with one hand and press the brake pads and/or

the brake arms together. In this position the usually barrel shaped nipple or the

outer cable can easily be engaged.

b ca e fd

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scott Road Bikes - 2017 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scott Road Bikes - 2017

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info