Bedienungsanleitung Scott Scale - 2016 (Seite 6 von 12) (Englisch)

664157

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

* Fox rebound adjuster shown

ENGLISHENGLISH

If your dropout needs to be replaced, we recommend this work should be carried out by

your local SCOTT dealer as the rear derailleur may need adjustment, failure to adjust this

correctly may result in accident or damage to your bike.

•

IMPORTANT!

We recommend all work should be carried out by your authorised SCOTT dealer!

If you wish to change this item yourself, please ensure the bike is supported correctly to

prevent damage by referring to the general manual instructions supplied with your bike.

Sram and non-direct

mountderailleurs

SCOTT part number 254090

Shimano direct

mountderailleurs

SCOTT part number 254091

Before installing the new hanger first

make sure the area is clean; insert

the hanger.

Insert the end cap through the frame and

into the hanger.

Make sure the location arrow is pointing

to the lower bolt hole; insert the bolt (Max

torque 1.5 N/M)

Insert the second bolt in the rear of the

dropout (Max torque 1.5 N/M)

Once the bike is reassembled please insure the wheels are refitted correctly and the gears

are set correctly including the over shift stops, please consult your authorized SCOTT dealer

for assistance.

•

REBOUND FORK SET-UP

“Rebound” describes the speed the fork returns back

to its original length after absorbing an obstacle,

setting of this is very important for the handling and

correct function of the bike.

The rebound adjustment dial location may vary form

fork to fork please consult the manual that came with

this bike.

After the fork pressure/SAG is correctly set ride your

bike in a safe area with your riding gear/backpack,

etc. While remaining in the saddle, ride you bike off a

drop/kerb of about 10-15 cm.

- If it bounces 1-2 times and settles the set-up is good.

- If it bounces more than 3 times the rebound is too fast, turn the knob 1-2 “clicks”

clockwise and repeat.

- If there is no bounce the rebound is too slow, turn the knob 1-2 click counter clockwise

and repeat.

- Repeat these steps until the desired result is achieved.

Your SCOTT Scale bike was designed to be used in conjunction with a specific forks,

changing the forks on your bike may cause poor/unsafe riding characteristics or damage

to frame and components, please consult your SCOTT dealer for any assistance you need,

failure to do this may affect your warranty

This is the basic principle on setting your forks up, please always consult the fork owner's

manual for full instructions to familiarize yourself with the product.

•

REPLACEABLE REAR DROPOUT

On SCOTT Scale models for 2017 the rear derailleur hanger is replaceable, this hanger is

available in two options depending on if your bike is equipped with a standard or direct

mount rear derailleur.

FOR CARBON SCOTT SCALE 3 FRAMES ONLY:

11 |

BIKE USER MANUAL | SCALESCALE | BIKE USER MANUAL

| 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scott Scale - 2016 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scott Scale - 2016

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info