Bedienungsanleitung Scott Spark - 2014 (Seite 11 von 15) (Englisch)

664181

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

SPARK | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 | SPARK

SPARK 2014

Tim, 21-Jan-13

User Manual: new points

FD-MOUNT Identification – Spark 700 and 900

Spark 900 – new FD

adaptor for MY14

Spark 700

NOTE:

• Colours in pictures are not representitive of reality

• New Spark 900 FD adaptor is not compatible with old Spark 12 CST because some FDs will touch

CST when assembled.

• New FD mounts for both Spark 700 and 900.

• Some customers complained of shifting problems, so for Spark 900, FD adaptor was changed (from Spark 12) to lower FD by

1mm to be the same as Shimano specs.

• Spark 900 FD adaptor can be identified by ID mark 900 and colour is now anodised grey rather than black.

SPARK 2014

Tim, 21-Jan-13

User Manual: new points

FD-MOUNT Identification – Spark 700 and 900

Spark 900 – new FD

adaptor for MY14

Spark 700

NOTE:

• Colours in pictures are not representitive of reality

• New Spark 900 FD adaptor is not compatible with old Spark 12 CST because some FDs will touch

CST when assembled.

• New FD mounts for both Spark 700 and 900.

• Some customers complained of shifting problems, so for Spark 900, FD adaptor was changed (from Spark 12) to lower FD by

1mm to be the same as Shimano specs.

• Spark 900 FD adaptor can be identified by ID mark 900 and colour is now anodised grey rather than black.

ENGLISH

On Spark bikes equipped with the FOX Nude 3/FOX Float CTD shock you can adjust

the BB height above ground in 2 positions by flipping a geometry chip located on the

linkage bar shock mount.

Please note the max.

tightening torque of

10Nm (88 in/lbs)

1. low BB for lower center of gravity over ground, slacker head angle

2. high BB for bigger clearance between pedals/crankset and obstacles on the

ground, steeper head angle

SPARK 700 SPARK 900

LOW POSITION

HEAD ANGLE 68.3° 69.5°

BB HEIGHT 330mm 317mm

HIGH POSITION

HEAD ANGLE 68.8° 70°

BB HEIGHT 336mm 323mm

ADJUSTABLE BB HEIGHT

IMPORTANT!

It is not possible to use this geometry chip with other shock models than the FOX

Nude /FOX Float CTD. The shock might collide with parts of the frame or linkage bar.

Models originally equipped with another shock than the FOX Nude /FOX Float CTD

will have a chip with a centered shock bolt hole.

On all Spark frames you will

find a Shimano E-type front

derailleur but fixed directly on

the swingarm without the plate

that is fixed normally between

the bottom bracket bearing

cup and the bottom bracket

housing of the front triangle

or a SRAM Direct Mount

Type S3 FD.

Please note that you always

need to use the adapter plate

attached to the bike or frame

set between chainstay and

front derailleur.

This adapter can be ordered at the SCOTT distribution with parts number:

235276 FD mount plate Set Spark 700 2014

235278 FD mount plate Set Spark 900 2014

The FD-adapter plates of Spark 700 and 900 series are NOT interchangeable

FRONT DERAILLEUR (FD) MOUNTING DETAILS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scott Spark - 2014 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scott Spark - 2014

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info