Bedienungsanleitung Scott Toy Bike - 2017 (Seite 22 von 33) (Englisch)

664142

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

ENGLISHENGLISH

43 |

KIDS’ TOY BICYCLE | OWNER’S MANUAL 2017OWNER’S MANUAL 2017 | KIDS’ TOY BICYCLE

| 42

b ca e fd

TRAINING WHEELS

Training wheels are designed to prevent the SCOTT toy bicycle from toppling

over, even when your child is yet unskilled (a). According to expert opinion,

training wheels are suitable to learn cycling to only a limited extent; often they

are even counterproductive. If these cycling aids are mounted, try to do without

as early as possible. Otherwise your child will get used to a completely wrong

riding technique. We recommend that you let your child practise with a tricycle,

a scooter or a walker. Experience has shown that if your child masters one of

these vehicles, getting familiar with the bicycle is less difficult.

The SCOTT toy bicycle of your child possibly includes training wheels. Start, if

necessary, by mounting the wheels to the arm. Loosen and remove the wheel

bolts completely at one side. Fasten the arm together with the support device

to the chainstay.

Make sure to properly mount the support device to the chainstay. Turn the

wheel nut without tightening it (b) and repeat the steps with the training wheel

on the other side. Both training wheels are then to be aligned in a way that with

the bike being in an upright position both wheels are in contact with the ground.

Finish by tightening the wheel nuts to the specified torque value.

DANGER!

If your child takes bends fast and rides over uneven ground, there is the

risk that he/she topples over with the SCOTT toy bicycle and the mounted

training wheels. Practise with your child how to handle the training wheels.

CAUTION!

Only buy training wheels that have been certified, for example according to

DIN/GS.

NOTE!

If you wish to install training wheels, ask your SCOTT dealer about suitable

models. Read the mounting instructions of the supplier and ask, if neces-

sary, your SCOTT dealer for further information.

NOTE!

The training wheels are only an unsatisfactory riding aid for very small chil-

dren and should be removed as soon as possible to train your child‘s sense

of balance.

Mounting the training wheels

Training wheel mounting (only for 12-inch and 16-inch models) and adjustment

of the chain tension on bicycles without derailleur gears. To mount the optional

training wheels for the 12-inch and 16-inch models proceed as described in the

following:

1. Release on one side of the rear wheel nut 1 and remove it including the wash-

er (c).

2. Assemble now the bolt and nuts/washers as shown below to fix the wheel on

part 2 (d).

3. Put part 3 in part 2 and fix it with nut 1 with the washer between nut 1 and

part 3 (e).

4. The long sleeved hole 4 (f) will help you to balance the bike when you assem-

bled on the other side of the bike the parts as mentioned above.

5. Both training wheels should be with a distance of 1-1.5cm to the ground when

the bike is balanced on its wheels. After balancing the bike please tighten the

wheel fixing nuts and the counter nuts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scott Toy Bike - 2017 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scott Toy Bike - 2017

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info