Bedienungsanleitung Scott Trekking - 2016 (Seite 42 von 80) (Englisch)

664166

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISHENGLISH

83 |

TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2017ORIGINAL OPERATING INSTRUCTIONS 2017 | TREKKING AND TREKKING-PEDELEC

| 82

CHAIN MAINTENANCE

Although the chain is one of the wearing components of your SCOTT bike, there

are still ways for you to prolong its life. Make sure the chain is lubricated regular-

ly, especially after riding in the rain. Try to only use gears which run the chain in

the straightest line between the sprockets and chainrings and get into the habit

of high cadence pedalling.

Chains on bicycles with derailleur gears are worn out after approx. 1,000 to

3,500 km or 50 to 125 hours of use. Heavily stretched chains impair the op-

eration of derailleur gears. Cycling with a worn-out chain also accelerates the

wear of the sprockets and chainrings. Replacing these components is relatively

expensive compared with the costs of a new chain. It is therefore advisable to

check the condition of the chain at regular intervals.

Your SCOTT dealer has accurate measuring instruments to check the chain

wear (c). Replacing the chain should ideally be left to an expert, as this requires

special tools. In addition, you need to select a chain matching your gear system

(d+e).

DANGER!

An improperly joined or heavily worn chain can break and cause an acci-

dent.

NOTE!

When replacing your chain, only use appropriate and suitable original spare

parts (f). Your SCOTT dealer will be pleased to help you.

NOTE!

For easy setting of the tension download the Gates Carbon Drive iP-

hone®-App (available free of charge in the iTunes® App Store), use the

Carbon Drive Krikit Gauge or the Eco Tension Tester (available in Europe at

present).

NOTE!

For further information visit the website at http://www.gatescarbondrive.com

BICYCLE CHAIN

Regular and correct lubrication of your bicycle chain ensures enjoyable riding

and prolongs its service life. It is not the quantity but the distribution and regular

application of lubricant that counts. Clean the dirt and oil off your chain with a

slightly oily rag from time to time (a). Special degreasers are not necessary; they

even have a damaging effect.

Having cleaned the chain as thoroughly as possible, apply chain oil, wax or

grease to the chain links (b). To lubricate the chain, drip the lubricant onto the

rollers of the lower run of the chain while you turn the crank. Once this is done,

turn the cranks a few more times; then let your SCOTT bike rest for a few min-

utes so that the lubricant can disperse. Finally wipe off excess lubricant with a

rag so that it does not spatter around during riding or can collect road dirt.

DANGER!

Make sure the braking surfaces of the rims, the rotors and the brake pads

remain clear of lubricants, otherwise the brake can fail!

NOTE!

For the sake of the environment, use biodegradable lubricants only. Bear in

mind that some of the lubricant can end up on the ground, especially in wet

conditions.

b ca e fd

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scott Trekking - 2016 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scott Trekking - 2016

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info