468756
40
Zoom out
Zoom in
Vorherige Seite
1/51
Nächste Seite
4. Managing the GoFlex Satellite™ Device GoFlex Satellite™ Settings and Preferences
GoFlex Satellite™ User Guide 32
Or,
4. Using a paperclip, press and release the factory defaults button. The factory defaults button
is located on the bottom of the GoFlex Satellite device, as shown in Figure 2 on page 4.
The Satellite Name is changed back to “GoFlex Satellite” and any password you may have set
is erased. See “Changing the Name of Your GoFlex Satellite™ Device” on page 32 or “Setting
a Password” on page 33 to reset these preferences.
You will need to reconnect to GoFlex Satellite. See “Connecting to the GoFlex Satellite™
Wireless Signal” on page 20.
Updating GoFlex Satellite™ Software
From time to time, new software is available for your GoFlex Satellite device. To check if new
software is available, go to www.seagate.com/support/goflexsatellite. If new software is
ready, it will be available from this site.
Once you download the software, follow these steps to update the GoFlex Satellite software.
1. From the GoFlex Media app or if you are using a browser, select Settings.
2. Select Update Satellite Software.
3. Follow the instructions on the screen to update the software.
Changing the Name of Your GoFlex Satellite™ Device
The GoFlex Satellite device is named “GoFlex Satellite” by default. This is the network name
that appears in the wireless network list when you choose to connect to the GoFlex Satellite
device from your Wi-Fi device. This name is also know as the SSID (Service Set Identifier).
You can change this name if you prefer it to be named differently. Follow these steps to
change the GoFlex Satellite name:
1. From the GoFlex Media app or if you are using a browser, select Settings.
2. Select Change Satellite Name.
3. Type a new name and then click Next.
4. Type the name once more to confirm the name change.
You will need to reconnect to your GoFlex Satellite device after the name has been changed.
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Seagate GoFlex Satellite wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info