Bedienungsanleitung Seagate Replica (Seite 9 von 16) (Englisch)

468757

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Seagate Replica User Guide 9

3. You can right-click on the item you want to recover. The resulting menu lets you perform these actions:

 •

Explore: view all the versions of the ﬁle that are available. When viewing a list of versions, you can use any of the remaining

commands in this list to restore a version.

 •

Open: open the item in its native application. Use that application to save a copy elsewhere.

 •

Copy: copy the ﬁle to the clipboard. You can then paste it into your preferred destination folder.

All ﬁles and folders you restore from Replica back to your computer remain on Replica as backup ﬁles. They can be restored

again if necessary.

Recovering Deleted Files

A deleted ﬁle remains on Replica. However, the ﬁle icon is dimmed to indicate that the ﬁle was deleted. To recover deleted ﬁles and

folders from Replica proceed as follows:

1. Launch the Replica browser in one of the usual ways. See “Launching the Replica Browser” for details.

2. Navigate to the folder from which you deleted the ﬁle. Deleted ﬁles have a dimmed icon.

3. To recover the most recent version of a ﬁle, copy and paste the ﬁle, or drag and drop its icon, to your desktop or another folder.

4. To recover an older version, double-click the ﬁle icon and choose the version you want from the resulting list. Then copy and paste

the ﬁle, or drag and drop its icon, to your desktop or another folder.

Using Replica to Migrate (Transfer) Data Files

You can use Replica to transfer data ﬁles from a Replica-enabled PC to any other Windows PC—whether or not it uses Replica itself.

This is because any Windows PC can temporarily connect with, or “host”, a Replica and have access to the backup ﬁles stored on it.

To transfer data from your Replica to another PC, follow these steps:

1. Ensure that the ﬁles you want to transfer to the other PC are backed up on Replica. If you’re unsure how to do this, see

“Obtaining Backup Information” for details.

2. Use the “Safely Disconnect” feature to disconnect Replica from your PC.

3. Connect Replica to the PC that will receive the ﬁles. A window pops up asking what you want to do. Click Browse.

Note: If the receiving PC also uses a Replica product, you may need to open the Replica browser (see “Launching the Replica

Browser”) and double-click on the icon with the name of this Replica’s home computer In addition, if your Replica backup is

password protected, you must enter the associated password. This ensures that only you can access your Replica backups.

4. Navigate the Replica backup as usual and transfer the ﬁles to the PC as you normally would. See “Finding and Restoring Files

and Folders using the Replica Browser” for details.

5. Unplug Replica and return it to its usual PC.

Except for the data ﬁles you transfer, Replica leaves absolutely nothing behind on the receiving computer.

Full Hard Disk Recovery

Note: Should you ever need the information in this section, you won’t have access to it because your PC will be non-functional.

Therefore, Seagate recommends that you print this section and store it with the CD¬ROM that you received with the product.

Replica makes it possible to completely recover from a hard disk malfunction by restoring your fully backed-up computer to a new

drive or drives. When you replace a malfunctioning hard disk with a new one, you must use a new hard disk that’s at least as large

as the original hard disk.

Note: If your computer is rendered unusable through loss or damage, you may be able to recover to an identical replacement

computer using the procedure below. The replacement computer must be identical the original in every respect. Any difference

whatsoever can cause recovery to fail because of inconsistencies between the hardware and restored software. In addition, certain

security features, such as ﬁngerprint readers, may prevent successful recovery. If you cannot replace the old computer with an

identical one, or if security features interfere with recovery, Seagate recommends that you instead restore only your data ﬁles

to the new computer without attempting to recover the entire system.

Creating an Updated CD-ROM for Hard Disk Recovery

Seagate may occasionally offer updates to the Replica hard disk recovery software. To use such an update, you must download

a disk image from Seagate and burn the image to a CD-ROM. Follow these instructions:

1. Make sure you are using a PC with hardware that can create CDs and that it is connected to the Internet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seagate Replica Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info