21
V. Test the camera and flash [above water]
Now that you have made all the correct settings to your flash and
camera, take a few more test pictures to make sure the camera
and external flash fires together.
1. Power on the camera and flash.
a. Make sure the camera settings are set as described in
section III of this manual.
b. Turn the flash brightness power knob on the back of the
flash to the for Auto.
2. Wait for the red flash-ready light to turn on.
3. Take a series of test picture while viewing the external flash at
an angle (Don’t look directly into the flash).
4. The camera’s flash and the external flash should be firing
together.
5. If the external flash is not firing at the same time as the
camera’s primary flash review the instructions on the previous
page or refer to the trouble shooting guide at the end of this
manual.
