Bedienungsanleitung Seat Alhambra 2019 (Seite 306 von 392) (Englisch)

817368

306

Zoom out

Zoom in

Vorherige Seite

1/392

Nächste Seite

Driving

●Close the rear lid.

●Before hitching the trailer, remove the dust

guard from the ball.

●The indicator only lights when the boot

hatch is open and when a trailer is not hitch-

ed.

Restoring the tow ball to its originally posi-

tion

●Stop the vehicle and apply the electric

parking brake.

●Switch the ignition off.

●Remove the trailer and disconnect the ca-

ble between the vehicle and trailer. If neces-

sary, remove the power socket adapter.

●Place the dust guard over the ball.

●Open the rear lid.

●Press the knob briefly ››› Fig. 280. The tow

ball is electronically released; the indicator

blinks.

●Push the tow ball into the bumper until it

locks in position and the button indicator

lights.

●Close the rear lid.

The control lamp

●When the control lamp flashes, the tow ball

is not in its final position, has not engaged or

is damaged ››› .

●When the control lamp remains lit and the

rear lid is open, the tow ball has inserted cor-

rectly into the folded or deployed position.

●When the rear lid is closed, the indicator is

turned off.

WARNING

The incorrect use of the tow hitch can

cause accidents and injury.

●Ensure that no person, animal or object

gets in the way of the tow ball.

●Never push the button when there is a tow

hitched or when any kind of carrier or ac-

cessory is fitted to the tow hitch ball.

●While the ball is moving, do not interfere

with any tool.

●Do not drive with a trailer if the control

lamp does not light.

●If there is a fault in the electric system or

the trailer tow hitch, visit a specialised

workshop to have it checked.

●If the diameter of the tow hitch is less

than 49 mm, never use this for a trailer.

CAUTION

●If anything is attached to the tow hitch

ball, do not, under any circumstances

press the button.

●Never direct a high-pressure or steam

cleaning system directly at the tow hitch

ball or trailer power socket. This could

cause damage to seals or remove lubricat-

ing grease.

Note

In extremely low temperatures, it is possi-

ble that the tow hitch is not released. In this

case, place the vehicle in a warmer loca-

tion (e.g. a garage).

Fitting a bicycle carrier on the mo-

bile tow hitch ball

The maximum load permitted for a bicycle

carrier on the tow hitch ball is 75 kg, with a

maximum distance of 30 cm from the sup-

port. The distance between supports is the

distance between the bicycle carrier centre

of gravity (with the bicycles) and the centre

of point of the tow hitch ball.

WARNING

The incorrect use of the tow hitch with a bi-

cycle carrier installed can cause accidents

and injury.

●Never exceed the load and distances be-

tween supports indicated.

●Never fit the bicycle carrier to the tow

hitch ball neck, underneath the tow hitch

given that the bicycle carrier may be incor-

rectly fitted due to the shape of the tow

hitch and the model of bicycle carrier.

304

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Alhambra 2019 Seite 306

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Alhambra 2019

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info