Bedienungsanleitung Seat Alhambra 2019 (Seite 343 von 392) (Englisch)

817368

343

Zoom out

Zoom in

Vorherige Seite

1/392

Nächste Seite

Wheels and tyres

wheel bolts with the right length and correct-

ly shaped bolt heads must be used. This en-

sures that wheels are fitted securely and that

the brake system functions correctly

››› page 87.

For technical reasons, it is not generally pos-

sible to use the wheels from other vehicles. In

some cases, this may also be true for the

same model of wheel.

The tyres and rims approved by SEAT are

specially matched to the characteristics of

the vehicle and are critical to good road

holding and safe handling.

Wheel bolts

Wheel bolts must be tightened to the correct

torque ››› page 87.

Beadlock wheel rims

Beadlock wheel rims have various compo-

nents. These are joined together by special

bolts using a special procedure. This ensures

good performance, a better seal, improved

safety and wheel run out. Therefore, worn

rims should always be replaced and must on-

ly be repaired in a specialised workshop.

SEAT recommends visiting a technical service

››› .

Wheel rims with bolted trims

Wheel rims may be fitted with interchangea-

ble trim parts which are attached to the rim

using self-locking bolts. Worn trims should

only be replaced at a specialised workshop.

SEAT recommends visiting a technical service

››› .

WARNING

The use of worn or damaged wheel rims

could make driving more dangerous and

result in serious accidents and damage.

●Only wheel rims which have been ap-

proved for use with your vehicle should be

used.

●Inspect wheel rims regularly for damage

and replace as required.

WARNING

If the bolted joints of wheel rims with bolted

ring trims are not correctly tightened or

loosened, this could result in serious acci-

dent.

●Never loosen the bolted joints of wheel

rims with bolted ring trims.

●Any work relating to wheel rims with bol-

ted rims should be carried out at special-

ised workshop. SEAT recommends taking

your car in for technical service.

Note

A SEAT Service Centre should be consulted

to find out whether wheels or tyres of dif-

ferent sizes to those originally fitted by

SEAT can be fitted, and to find out about

the combinations allowed between the

front axle (axle 1) and the rear axle (axle 2).

Replacement of wheel rims and

new tyres

New tyres

●When tyres are new, drive with extreme

caution for the first 500 km (310 miles), as all

tyres need to be run in. Tyres which have not

been run in do not have such good grip or

››› braking capacity ››› .

●All four wheels must be fitted with radial

tyres of the same type, size (rolling circumfer-

ence) and the same tread pattern.

●The tread depth of new tyres may vary, ac-

cording to the type and make of tyre and the

tread pattern.

Replacing tyres

●Where possible, always replace both

wheels on an axle (both wheels on the front

axle or both wheels on the rear axle) ››› .

●Old tyres should only be replaced by SEAT

approved tyres for the vehicle in question,

and in accordance with the maximum permit-

ted size, diameter, load and speed capacity. »

341

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Alhambra 2019 Seite 343

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Alhambra 2019

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info