Bedienungsanleitung Seat Alhambra 2020 (Seite 350 von 380) (Englisch)

817394

350

Zoom out

Zoom in

Vorherige Seite

1/380

Nächste Seite

Information for the user

The storing of the data allows specialised

workshops to detect and repair faults. Stored

data may include:

●Data relating to the engine or the gearbox

●Speed

●Direction of travel

●Braking force

●Detection of seat belt

The vehicle control units never record conver-

sations held by passengers in the vehicle.

In vehicles equipped with an emergency call

function via the mobile phone or other appli-

ances connected in the vehicle, it is possible

to send the vehicle position. If the control unit

records an accident with airbag activation,

the system may automatically send a signal.

This will depend on the network operator.

Normally, transmission is only possible in

areas with good coverage.

Event Data Recorder

The vehicle is not fitted with an event data re-

corder.

An event data recorder temporarily stores the

vehicle information. Therefore, in the event of

an accident, it is possible to obtain detailed

information about how the accident occur-

red. For example, in vehicles with airbag sys-

tems, data relating to speed of impact, seat

belt status, seat positions and airbag activa-

tion times may be stored. The volume of data

depends on the manufacturer.

Event data recorders can only be mounted

with authorisation from the vehicle owner

and, in some countries, they are governed by

local legislation.

Reprogramming of control units

On the whole, all the data required for the

component management is stored in the

control units. The programming of certain

convenience functions, such as the turn sig-

nals, individual door opening and instructions

on the display can be modified using special

equipment at the workshop. If this is the case,

the information and descriptions given in the

Instruction Manual will not match the original

functions. Therefore, SEAT recommends that

any modifications be recorded in the section

“Other workshop notes” in the Maintenance

Programme.

The technical service centre must have a re-

cord of any modification to the programming.

Reading the vehicle's fault memory

There is a diagnostics connector in the vehi-

cle interior for reading the vehicle fault mem-

ory. The fault memory documents errors and

deviations from the theoretical values of the

electronic control units.

The diagnostics connector is in the driver side

footwell area, next to the lever for opening

the bonnet, below a cover.

The fault memory should only be read and

reset by a specialised workshop.

Other important information

Environmental compatibility

Environmental protection is a top priority in

the design, choice of materials and manufac-

ture of your new SEAT.

Constructive measures to encourage re-

cycling

●Joints and connections designed for easy

dismantling.

●Modular construction to facilitate disman-

tling.

●Increased use of single-grade materials.

●Plastic parts and elastomers are marked in

accordance with ISO 1043, ISO 11469 and

ISO 1629.

Choice of materials

●Use of recycled materials.

●Use of compatible plastics in the same part

if its components are not easily separated.

348

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Alhambra 2020 Seite 350

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Alhambra 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info