Bedienungsanleitung Seat Alhambra 2021 (Seite 33 von 380) (Englisch)

817393

Zoom out

Zoom in

Vorherige Seite

1/380

Nächste Seite

Transporting children safely

Child seats by approval category

Child seats may have the approval category

of universal, semi-universal, vehicle specific

(all according to the ECE-R44 standard) or i-

Size (according to the ECE-R129 standard).

●Universal: child seats with universal appro-

val can be installed in all vehicles. There is no

need to consult any list of models. In the case

of universal approval for ISOFIX, the child

seat is additionally provided with a Top Tether

belt.

●Semi-universal: semi-universal approval,

in addition to the standard requirements of

universal approval, requires safety devices to

lock the child seat, which require additional

testing. Child seats with semi-universal ap-

proval include a list of vehicle models for

which they can be installed.

●Vehicle-specific: vehicle-specific approval

requires a dynamic test of the child seat for

each vehicle model separately. Child seats

with vehicle-specific approval also include a

list of vehicle models for which they can be

installed.

●i-Size: child seats with i-Size approval must

meet the requirements set out in the ECE-

R129 standard in relation to installation and

safety. Child seat manufacturers can tell you

which seats have i-Size approval for this vehi-

cle.

Fitting and using child seats

Fig. 27 Airbag sticker: on the passenger’s sun

visor

Fig. 28 Airbag sticker: on the rear frame of the

passenger side door

Warnings about fitting a child seat

ake the following general warnings into ac-

count if you are going to fit a child seat. They

are valid for all child seats regardless of their

attachment system.

●Please read and follow the child seat man-

ufacturer's operating instructions.

●The child seat should preferably be fitted to

the rear seat behind the front passenger seat

so that the child can exit the vehicle on the

pavement side.

●Set the height of the seat belt such that it

adapts to the child seat naturally, without

twisting. The lowest position of the seat belt

height regulator must be used with rear-fac-

ing child seats.

●To correctly use a child seat in the back,

the front backrest must be adjusted so that

there is no contact with the child seat in the

back in the case that it goes opposite to the

direction of the car. In the case of front facing

restraint systems, the front backrest must be

adjusted so that there is no contact with the

child's feet.

●If a semi-universal type chair is to be instal-

led, in which the method of attachment to the

car is through the seat belt and support

bracket, it should never be installed in the

central rear seat as the ground clearance is

lower than in other places and the support

bracket will not allow the seat to remain suffi-

ciently stable.

●When fitting a child seat on the front pas-

senger seat, the seat must be moved back-

wards as far as possible and placed in the »

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Alhambra 2021 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Alhambra 2021

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info