Bedienungsanleitung Seat Alhambra 2021 (Seite 46 von 380) (Englisch)

817393

Zoom out

Zoom in

Vorherige Seite

1/380

Nächste Seite

Emergencies

●Remove the bottle from the valve.

●Place the insert back into the tyre valve us-

ing the tool ››› Fig. 41 1.

Inflating the tyre

●Screw the compressor tyre inflator tube

››› Fig. 41 8 into the tyre valve.

●Check that the air bleed screw is closed

››› Fig. 41 6.

●Start the engine and leave it running.

●Insert the connector ››› Fig. 41 9 into the

vehicle's 12-volt socket ››› page 158.

●Turn the air compressor on with the

ON/OFF switch ››› Fig. 41 5.

●Keep the air compressor running until it rea-

ches 2.0 to 2.5 bar (29-36 psi/200-250 kPa).

A maximum of 8 minutes.

●Disconnect the air compressor.

●If it does not reach the pressure indicated,

unscrew the tyre inflator tube from the valve.

●Move the vehicle 10m so that the sealant is

distributed throughout the tyre.

●Screw the compressor tyre inflator into the

valve.

●Repeat the inflation process.

●If the indicated pressure still cannot be

reached, the tyre is too badly damaged. Stop

and request assistance from an authorised

technician.

●Disconnect the air compressor. Unscrew

the tyre inflator tube from the tyre valve.

●When the tyre pressure is between 2.5 and

2.0 bars, continue driving without exceeding

80 km/h (50 mph).

●Attach the sticker ››› Fig. 41 2 to the instru-

ment cluster, within the driver's visual field.

●Check the pressure again after 10 minutes

››› page 44.

WARNING

When inflating the wheel, the air compres-

sor and the inflator tube may become hot.

●Protect hands and skin from hot parts.

●Do not place the hot flexible inflator tube

or hot air compressor on flammable mate-

rial.

●Allow them to cool before storing the de-

vice.

●If it is not possible to inflate the tyre to at

least 2.0 bars (29 psi / 200 kPa), the tyre is

too badly damaged. The sealant is not in a

good condition to seal the tyre. Do not con-

tinue driving. Seek specialist assistance.

CAUTION

Switch off the air compressor after a maxi-

mum of 8 operational minutes to avoid

overheating! Before switching on the air

compressor again, let it cool for several mi-

nutes.

Check after 10 minutes of driving

Screw the inflator tube ››› Fig. 41 5 again

and check the pressure on the gauge 6.

1.3 bar (19 psi / 130 kPa) and lower:

●Stop the vehicle! The tyre cannot be

sealed sufficiently with the tyre mobility set.

●You should obtain professional assistance

››› .

1.4 bar (20 psi / 140 kPa) and higher:

●Set the tyre pressure to the correct value

again.

●Carefully resume your journey until you

reach the nearest specialised workshop with-

out exceeding 80 km/h (50 mph).

●Have the damaged tyre replaced.

WARNING

Driving with an unsealed tyre is dangerous

and can cause accidents and serious in-

jury.

●Do not continue driving if the tyre pres-

sure is 1.3 bar (19 psi / 130 kPa) and lower.

●Seek specialist assistance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Alhambra 2021 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Alhambra 2021

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info