Bedienungsanleitung Seat Alhambra 2021 (Seite 50 von 380) (Englisch)

817393

Zoom out

Zoom in

Vorherige Seite

1/380

Nächste Seite

Emergencies

●Block the wheel diagonally opposite the

wheel being changed with folding wheel

chocks* or other suitable objects.

●Find the support point on the strut (sunken

area) closest to the wheel to be changed

››› Fig. 47.

●Turn the jack* crank handle, located below

the strut support point, to raise it until the

tab ››› Fig. 48 is below the housing that is

provided.

●Align the jack* so that the tab “grips” onto

the housing provided on the cross member

and the mobile base is resting on the ground.

The base plate 2 should fall vertically with re-

spect to the support point.

●Continue turning the jack* until the wheel is

slightly lifted off the ground.

WARNING

The factory-supplied jack* is only de-

signed for changing wheels on this model.

On no account attempt to use it for lifting

heavier vehicles or other loads. Risk of in-

jury.

●Make sure that the jack* remains stable.

If the surface is slippery or soft, the jack*

could slip or sink, respectively, with the re-

sultant risk of injury.

●Only raise the vehicle with the jack* sup-

plied by the manufacturer. Other jacks,

even those approved for other SEAT mod-

els could slip, with the consequent risk of

injury.

●Only mount the jack* on the support

points designed for this purpose on the

strut, and always align the jack correctly. If

you do not, the jack* could slip as it does

not have an adequate grip on the vehicle:

risk of injury!

●You should never place a body limb such

as an arm or leg under a raised vehicle that

is solely supported by the jack.

●If you have to work underneath the vehi-

cle, you must use suitable stands addition-

ally to support the vehicle, there is a risk of

accident!.

●Never raise the vehicle if it is tilting to one

side or the engine is running.

●Never start the engine when the vehicle is

raised. The vehicle may come loose from

the jack due to the engine vibrations.

CAUTION

The vehicle must not be raised on the

crossbar. Only place the jack* on the

points designed for this purpose on the

strut. Otherwise, the vehicle may be dam-

aged.

Removing and installing a wheel

Fig. 49 Wheel change: loosen wheel nuts with

the socket in the handle of the screwdriver.

Change the wheel after loosening the wheel

nuts and raising the vehicle with the jack.

When removing/fitting the wheel, the rim may

hit and damage the brake disc. For this rea-

son, please take care and get a second per-

son to assist you.

Taking off the wheel

●Using the hexagonal socket in the wheel

brace ››› Fig. 49, unscrew the slackened

wheel nuts and place them on a clean sur-

face.

●Unscrew the wheel nuts using the box

spanner and place them on a clean surface.

●Take off the wheel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Alhambra 2021 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Alhambra 2021

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info