Bedienungsanleitung Seat Ateca 2018 (Seite 273 von 348) (Englisch)

817355

273

Zoom out

Zoom in

Vorherige Seite

1/348

Nächste Seite

Driver assistance systems

●The system is not a replacement for driver

awareness. Supervise the parking operation

at all times, as well as the vehicle's surround-

ing area. Adapt your speed and driving style

at all times to suit visibility, weather, road

and traffic conditions.

●Do not be distracted from the traffic by

looking at the screen.

●The images on the rear assist screen are

only two-dimensional. Due to a lack of spatial

depth, protruding parts or holes in the road,

for example, are more difficult to detect or

may not be seen at all.

●Vehicle load modifies the representation of

the orientation lines displayed. The width

represented by the lines diminishes with ve-

hicle load. Pay special attention to the vehi-

cle's surroundings when the inside of the ve-

hicle of the luggage compartment is carrying

a heavy load.

●In the following situations, the objects or

other vehicles shown in the navigation sys-

tem display appear to be further away or

closer than they really are: Pay special atten-

tion:

–On moving from a horizontal plane to a

slope.

–On moving from a slope to a horizontal

plane.

–If the vehicle is heavily loaded at the

rear.

–When the vehicle approaches objects

that are not on the ground surface or are

jutting out from it. These objects may al-

so be outside the camera's angle of vi-

sion when reversing.

Note

●It is important to take great care and pay

special attention if you are not yet familiar

with the system.

●Rear assist will not be available if the vehi-

cle's rear lid is open.

Instructions for use

Fig. 233 In the rear lid handle: location of the

rear assist camera.

A camera installed in the rear lid handle as-

sists the driver in reverse parking or manoeu-

vring ››› Fig. 233. The camera image is viewed

together with orientation lines projected by

the system on the Easy Connect system

screen. The bottom of the screen displays

part of the bumper corresponding to the

number plate area that will be used as refer-

ence by the driver.

Rear assist settings

Rear assist offers the user the possibility to

change the image's brightness, contrast and

colour settings.

To change these settings:

●Park the vehicle in a safe place.

●Apply the parking brake.

●Switch the ignition on.

●If necessary, switch on the Easy Connect

system.

●Engage reverse gear or turn the selector

lever to position R.

●Press the  function button displayed on

the right of the image.

●Make the desired adjustments on the menu

by pressing the –/+ function buttons or by

moving the corresponding scroll button.

Necessary conditions for parking and ma-

noeuvring with the rear assist

The system should not be used in the follow-

ing cases:

●If the image displayed is not very reliable or

is distorted, for example low visibility or dirty

lens. »

271

Technical dataAdviceOperationEmergenciesSafety

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Ateca 2018 Seite 273

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Ateca 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info