Bedienungsanleitung Seat Ateca 2022 (Seite 73 von 371) (Englisch)

817351

Zoom out

Zoom in

Vorherige Seite

1/371

Nächste Seite

Instruments and warning/control lamps

Long-term: This memory contains trav-

el data up to a maximum of 19 hours and

59 minutes or 99 hours and 59 minutes,

or up to a maximum of 1999.9 km or

9999.9 km. When one of these values is

exceeded (varies depending on the ver-

sion of the instrument panel), the memo-

ry is deleted.

Delete journey data presets

●Select the memory that you wish to erase.

●Hold the  button of the multifunction

steering wheel or the  button of the multi-

function wheel pressed down for about 2

seconds.

Select the instructions

In the Infotainment system, in the menu Vehi-

cle settings, you can display different travel

data ››› page 89.

Current consumption: The current

fuel consumption display operates

throughout the journey, in litres/100 km;

and with the engine running and the ve-

hicle stopped, in litres/hour.

Average consumption: The average

fuel consumption is displayed after driv-

ing for approximately 300 metres.

–

Travelling time: This indicates the

hours (h) and minutes (min) since the ig-

nition was switched on.

Range: Approximate distance in km that

can still be travelled if the same driving

style is maintained.

AdBlue range or : Approximate

distance in km that can still be travelled

with the current level of the AdBlue®

tank with the same driving style. The in-

dication appears from a range of less

than 2,400 km and cannot be deactiva-

ted.1)

Distance: Distance covered in km (m)

after switching on the ignition.

Average speed: The average speed

will be shown after driving for approxi-

mately 100 metres.

Digital speed display: Current

speed displayed in digital format.

Eco tips: Recommendations messag-

es are shown to reduce consumption

through good driving practices, e.g. Air

conditioning on: close the win-

dow.

Setting a speed warning

●Select the display Warning at --- km/h

or Speed warning at --- mph.

–

●Press the button  on the windscreen

wiper lever or the button  on the multifunc-

tion steering wheel to store the current speed

and activate the warning.

●Activate: adjust to the desired speed within

5 seconds using the rocker switch  on the

windscreen wiper lever or by turning the

thumbwheel on the multifunction steering

wheel. Next, press the button  or 

again or wait several seconds. The speed is

stored and the warning activated.

●Deactivate: press button  or button

 . The stored speed is deleted.

The warning can be adjusted for speeds be-

tween 30 km/h (18 mph) and 250 km/h

(155 mph).

Display Oil temperature

The engine reaches its operating tempera-

ture when, under normal driving conditions,

the oil temperature is between 80°C (176°F)

and 120°C (248°F). If a great effort is required

from the engine and the outside temperature

is high, the engine oil temperature may in-

crease. This does not present any problem as

long as the warning lamps  or 

››› page 311 do not appear on the display.

1) Not available in all countries.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Ateca 2022 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Ateca 2022

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info