290 If and when
The bulbs are secured with a bayonet fastener. The table below
gives an overview of the bulb positions.
–Lightly press the defective bulb into the bulb holder, then turn it
to the left and remove it.
–Fit the new bulb, pressing it into the bulb holder and turn it to
the right as far as it will go.
–Use a cloth to remove any fingerprints from the glass part of the
bulb.
–Check whether the new bulb is working.
–Re-install the bulb holder ⇒ page 291.
Position of the bulbs
Pos.
⇒ Fig. 235 Bulb function
A Reverse lights P21W LL
B Rear side lights W5W LL
C Rear fog light H21W
Changing bulbs. LED lamps
All bulbs can be changed easily in the bulb holder.
Fig. 236 Position of the
bulbs in the bulb holder.
Example: Tail lights on
the rear lid
The bulbs are secured with a bayonet fastener. The table below
gives an overview of the bulb positions.
–Lightly press the defective bulb into the bulb holder, then turn it
to the left and remove it.
–Fit the new bulb, pressing it into the bulb holder and turn it to
the right as far as it will go.
–Use a cloth to remove any fingerprints from the glass part of the
bulb.
–Check whether the new bulb is working.
–Re-install the bulb holder ⇒ page 291.
