Bedienungsanleitung Seat Ibiza 2015 (Seite 51 von 248) (Englisch)

817327

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

The essentials

●Find the support point on the strut (sunken

area) closest to the wheel to be changed

››› Fig. 66.

●Place the jack under the jacking point and

turn the crank until the arm of the jack is di-

rectly below the vertical rib under the door

sill.

●Align the jack so that the arm of the jack

fits around the rib under the door sill and the

movable base plate of the jack is flat on the

ground ››› Fig. 67.

●Continue turning the jack* until the wheel

is slightly lifted off the ground.

WARNING

●Make sure that the jack* remains stable. If

the surface is slippery or soft, the jack* could

slip or sink, respectively, with the resultant

risk of injury.

●Only raise the vehicle with the jack* sup-

plied by the manufacturer. Other vehicles

could slip, with the consequent risk of injury.

●Only mount the jack* on the support points

designed for this purpose on the strut, and

always align the jack correctly. If you do not,

the jack* could slip as it does not have an ad-

equate grip on the vehicle: risk of injury!

●The height of the parked vehicle can

change as a result of variations in tempera-

ture and loading.

CAUTION

The vehicle must not be raised on the cross-

bar. Only place the jack* on the points de-

signed for this purpose on the strut. Other-

wise, the vehicle may be damaged.

Removing and fitting the wheel

Change the wheel after loosening the wheel

bolts and raising the vehicle with the jack.

Taking off the wheel

●Unscrew the wheel bolts using the box

spanner and place them on a clean surface.

●Take off the wheel ››› .

Putting on the spare wheel

When fitting tyres with a compulsory rotation

direction, observe the instructions in

››› page 49.

●Mount the wheel.

●Screw on the wheel bolts in position and

tighten them loosely with a box spanner.

●Carefully lower the vehicle using the jack*.

●Tighten the wheel bolts in diagonal pairs

using the wheel brace.

The wheel bolts should be clean and turn

easily. Before fitting the spare wheel, inspect

the wheel condition and hub mounting surfa-

ces. These surfaces must be clean before fit-

ting the wheel.

CAUTION

When removing/fitting the wheel, the rim

may hit and damage the brake disc. For this

reason, please take care and get a second

person to assist you.

Tyres with compulsory rotation direc-

tion

A directional tread pattern can be identified

by the arrows on the sidewall that point in

the direction of rotation. Always observe the

direction of rotation indicated when fitting

the wheel to guarantee optimum properties

of this type of tyres with regard to grip,

noises, wear and aquaplaning.

If it is absolutely necessary to fit the spare

tyre* against the direction of rotation, drive

with care as this means the tyre does not of-

fer optimum driving properties. This is of par-

ticular importance when the road surface is

wet.

To return to directional tread tires, replace

the punctured tyre as soon as possible and

restore the obligatory direction of rotation of

all tyres.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Ibiza 2015 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Ibiza 2015

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info