Bedienungsanleitung Seat Ibiza 2019 (Seite 58 von 360) (Englisch)

817316

Zoom out

Zoom in

Vorherige Seite

1/360

Nächste Seite

The essentials

●The height of the parked vehicle can

change as a result of variations in tempera-

ture and loading.

CAUTION

The vehicle must not be raised on the

crossbar. Only place the jack* on the

points designed for this purpose on the

strut. Otherwise, the vehicle may be dam-

aged.

Removing and fitting the wheel

Change the wheel after loosening the wheel

bolts and raising the vehicle with the jack.

Taking off the wheel

●Unscrew the wheel bolts using the box

spanner and place them on a clean surface.

●Take off the wheel ››› .

Putting on the spare wheel

When fitting tyres with a compulsory rotation

direction, observe the instructions in

››› page 57.

●Mount the wheel.

●Screw on the wheel bolts in position and

tighten them loosely with a box spanner.

●Carefully lower the vehicle using the jack*.

●Tighten the wheel bolts in diagonal pairs

using the wheel brace.

The wheel bolts should be clean and turn

easily. Before fitting the spare wheel, inspect

the wheel condition and hub mounting surfa-

ces. These surfaces must be clean before fit-

ting the wheel.

Wheel bolt tightening torque

The prescribed tightening torque for wheel

bolts for steel and alloy wheels is 120 Nm. Af-

ter changing a wheel, have the tightening tor-

que checked immediately with a torque

wrench that is working perfectly.

Before checking tightening torque, have any

rusty wheel bolts that are difficult to screw re-

placed and clean the wheel hub threads.

Never apply grease or oil to wheel bolts or to

the wheel hub threads. Even if the bolts have

been tightened to the prescribed torque, they

could come loose while driving.

WARNING

If the wheel bolts are not properly tight-

ened, they could come loose while driving

and cause an accident, serious injury and

loss of vehicle control.

●Use only wheel bolts which correspond

to the rim in question.

●Never use different wheel bolts.

●Wheel bolts and threads should be clean,

free of oil and grease, and it should be pos-

sible to screw them easily.

●To loosen and tighten wheel bolts, only

use the wheel wrench that came with the

car from the factory.

●Loosen the wheel bolts only about one

turn before raising the vehicle with the jack.

●Never apply grease or oil to wheel bolts

or to the wheel hub threads. Even if the

bolts have been tightened to the prescri-

bed torque, they could come loose while

driving.

●Never loosen the screwed joints of wheel

rims with bolted ring trims.

●If wheel bolts are tightened below the

prescribed torque, the bolts and rims could

come loose while driving. If tightening tor-

que is too high, the wheel bolts or threads

can be damaged.

CAUTION

When removing/fitting the wheel, the rim

may hit and damage the brake disc. For this

reason, please take care and get a second

person to assist you.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Ibiza 2019 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Ibiza 2019

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info