Bedienungsanleitung Seat Ibiza 2020 (Seite 47 von 360) (Englisch)

817317

Zoom out

Zoom in

Vorherige Seite

1/360

Nächste Seite

Self-help

Taking off the wheel

●Unscrew the wheel nuts using the box

spanner and place them on a clean surface.

●Take off the wheel.

Putting on the spare wheel

Check the direction of rotation of the tyre

››› page 45.

●Place the spare wheel or temporary spare

wheel into position.

●Screw on the wheel nuts in position and

tighten them loosely with a box spanner.

●To tighten the anti-theft locking wheel nuts

use the corresponding adaptor.

●Carefully lower the vehicle using the jack*.

●Use the wheel spanner to tighten all of the

wheel nuts clockwise. Tighten the bolts in di-

agonal pairs (not in a circle).

●Put the caps, trim or full hubcap back on

››› page 41.

The wheel nuts should be clean and turn

easily. Before fitting the spare wheel, inspect

the wheel condition and hub mounting surfa-

ces. These surfaces must be clean before fit-

ting the wheel.

Tightening torque of the wheel nuts

The recommended tightening torque for

wheel nuts for steel and alloy wheels is

120 Nm. After changing a wheel, have the

tightening torque checked immediately with a

torque wrench that is working perfectly.

Before checking tightening torque, have any

rusty wheel nuts that are difficult to screw re-

placed and clean the wheel hub threads.

Never apply grease or oil to wheel nuts or to

the wheel hub threads. Even if the bolts have

been tightened to the prescribed torque, they

could come loose while driving.

Tyres with directional tread pattern

Tyres with directional tread pattern have

been designed to operate best when rotating

in only one direction. An arrow on the tyre

sidewall indicates the direction of rotation on

tyres with directional tread. Always observe

the indicated direction of rotation in order to

guarantee optimum grip and help avoid

aquaplaning, excessive noise and wear.

If the tyre is mounted in the opposite direction

of rotation, drive with extreme caution, as the

tyre is no longer being used correctly. This is

of particular importance when the road sur-

face is wet. Change the tyre as soon as pos-

sible or remount it with the correct direction

of rotation.

Works after changing a wheel

●Alloy wheels: replace the wheel bolt caps.

●Plate wheels: replace the wheel hubcap .

●Return all tools to their proper storing loca-

tion.

●If the replaced wheel does not fit in the

spare wheel housing, store it safely in the lug-

gage compartment ››› page 129.

●Check the tyre pressure of the newly moun-

ted tyre as soon as possible.

●In vehicles fitted with a tyre pressure indica-

tor, adjust the pressure and store it in memory

››› page 314.

●Have the tightening torque of the wheel

nuts checked as soon as possible with a tor-

que wrench ››› page 45. Meanwhile, drive

carefully.

●Have the flat tyre replaced as quickly as

possible.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Ibiza 2020 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Ibiza 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info