Bedienungsanleitung Seat Leon 2024 (Seite 28 von 406) (Englisch)

817342

Zoom out

Zoom in

Vorherige Seite

1/406

Nächste Seite

Driver information

1) Not available in all countries.

2) Only with digital instrument cluster.

3) With an analogue instrument panel, the warnings are always shown in white.

–

Delete journey data presets

● Select the memory that you wish to erase.

●Keep the button on the multi-function

steering wheel pressed for approximately 2

seconds.

Select the instructions

On the instrument cluster, it is selected man-

ually using the button on the multifunc-

tion steering wheel. To access the contents of

the tube, rotate the right hand thumbwheel up/

down.

Current consumption: The current fuel

consumption display operates throughout

the journey, in litres/100 km; and with the

engine running and the vehicle stopped, in

litres/hour.

Average consumption: The average

fuel consumption is displayed after driving

for approximately 300 metres.

Travelling time: This indicates the

hours (h) and minutes (min) since the igni-

tion was switched on.

Range: Approximate distance in km that

can still be travelled if the same driving

style is maintained.

AdBlue range or : Approximate dis-

tance in km that can still be travelled with

the current level of the AdBlue® tank with

the same driving style. The indication ap-

pears from a range of less than 2400 km

and cannot be deactivated.1)

Distance travelled: Distance covered

in km (m) after switching on the ignition.

Average speed: The average speed will

be shown after driving for approximately

100 metres.

Boost/Torque: Indicates the power and

torque of the combustion engine (does not

indicate electric mode).

FAS: Reduced assistant indication.

Oil temperature display2)

The engine reaches its operating temperature

when, under normal driving conditions, the

oil temperature is between 80°C (176°F) and

120°C (248°F). If a great eort is required from

the engine and the outside temperature is high,

the engine oil temperature may increase. This

does not present any problem as long as the

warning lamps or ›››page337 do not

appear on the display.

Warning and information messages

The system runs a check on certain com-

ponents and functions when the ignition is

switched on and while the vehicle is moving.

Faults are displayed on the instrument cluster

display as red and yellow warning symbols3)

›››page13 accompanied by messages and,

depending on the case, even an audible warn-

ing. The representation of the messages and

symbols may vary depending on the version of

the instrument panel.

Existing faults can also be checked man-

ually. To do this, open the Vehicle status

›››page32 menu.

Priority 1 warning (in red)

The symbol lights up or ﬂashes (in part ac-

companied by audible warnings). Stop driv-

ing! Danger! Check the fault and eliminate

the cause. If necessary, seek professional assis-

tance.

Priority 2 warning (in yellow)

The symbol lights up or ﬂashes (in part accom-

panied by audible warnings). Operating faults

or the lack of operating ﬂuids can cause dam-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Leon 2024 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Leon 2024

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info