Bedienungsanleitung Seat Mii electric 2020 (Seite 131 von 232) (Englisch)

817313

131

Zoom out

Zoom in

Vorherige Seite

1/232

Nächste Seite

Operating modes

You may still need to manually start playback

on the Bluetooth® source. When playback on

the Bluetooth® audio source is stopped, the

Infotainment system remains in Bluetooth®

Audio mode.

Controlling playback

The extent to which the Bluetooth® audio

source can be controlled via the Infotainment

system depends on the connected Blue-

tooth® audio source.

With media players that support the AVRCP

Bluetooth® profile, playback on the Blue-

tooth® audio source can be automatically

started or stopped when the unit is switched

to Bluetooth® Audio mode or to a different au-

dio source. In addition, it is possible to view or

change the track via the Infotainment system.

WARNING

Do not perform the pairing and connection

process while driving. This may cause an

accident!

Note

●Due to the large number of possible Blue-

tooth® audio sources, it is not possible to

guarantee fault-free operation of all de-

scribed functions for all these sources.

●To operate the media and phone with the

Bluetooth® device connected, please read

the electronic Instructions Manual of the

manufacturer.

●Only use compatible Bluetooth® devices.

You can request information about compat-

ible Bluetooth® products at a SEAT Author-

ised Service or online.

External audio source connected to

the AUX-IN multimedia socket

Depending on the version of the vehicle, there

is an AUX-IN connection on the front of the ra-

dio ››› page 114, in the glove compartment on

the passenger side, on the centre console or

on the armrest between the front seats.

The AUX-IN multimedia connection can only

be used with a 3.5 mm jack.

A connected external audio source is played

over the vehicle speakers and cannot be

controlled via the radio system controls.

The AUX-IN multimedia connection must be

activated in the system settings so it can be

displayed on the Media selection menu

››› page 126.

Connecting an external audio source to

the AUX-IN multimedia socket

●Lower the base volume on radio.

●Connect the external audio source to the

AUX-IN multimedia socket.

●Start playback on the external audio

source.

●In the Media mode, press the  equip-

ment button to display the Media source se-

lection menu again ››› page 126.

●Press the  function button.

The output volume of a connected external

audio source should be adjusted to the vol-

ume of the other audio sources.

Adjust the playback volume

If you need to increase the playback volume

for the external audio source, first lower the

base volume on the radio system.

If the sound from the external audio source is

too low, increase the output volume on the

external audio source, if possible. If this is not

enough, adjust the input volume in the sys-

tem settings to Level 2 or Level 3.

If the sound from the connected external au-

dio source is too loud or distorted, lower the

output volume on the external audio source,

if possible. If this is not enough, change the

input volume to Level 2 or Level 1.

Note

●When the playback from the external au-

dio source ends or the connection to the

AUX-IN socket is interrupted, the radio goes

back to the AUX menu. »

129

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Mii electric 2020 Seite 131

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Mii electric 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info