Bedienungsanleitung Seat Tarraco 2023 (Seite 59 von 408) (Englisch)

817362

Zoom out

Zoom in

Vorherige Seite

1/408

Nächste Seite

Safety

Transporting children safely

1) Compliance with current national legislation and the manufacturer's instructions is required when using or installing child seats.

ing. Child seats with semi-universal approval

include a list of vehicle models for which they

can be installed.

●Vehicle-speciﬁc: vehicle-speciﬁc approval

requires a dynamic test of the child seat for

each vehicle model separately. Child seats

with vehicle-speciﬁc approval also include a list

of vehicle models for which they can be instal-

led.

●i-Size: child seats with i-Size approval must

meet the requirements prescribed in the ECE-

R 129 standard in relation to installation and

safety. Child seat manufacturers can tell you

which seats have i-Size approval for this vehi-

cle.

Fitting and using child seats

Fig.39 Airbag sticker: on the passenger side

sunshade blind.

Fig.40 Airbag sticker: on the rear frame of the

passenger side door.

Warnings about ﬁtting a child seat

Take the following general warnings into ac-

count if you are going to ﬁt a child seat. They

are valid for all child seats regardless of their

attachment system.

●Please read and follow the child seat manu-

facturer's operating instructions.

●The child seat should preferably be ﬁtted to

the rear seat behind the front passenger seat

so that the child can exit the vehicle on the

pavement side.

●Set the height of the seat belt such that it

adapts to the child seat naturally, without twist-

ing. The lowest position of the seat belt height

regulator must be used with rear-facing child

seats.

●To correctly use a child seat in the back, the

front backrest must be adjusted so that there

is no contact with the child seat in the back in

the case that it goes opposite to the direction

of the car. In the case of front facing restraint

systems, the front backrest must be adjusted so

that there is no contact with the child's feet.

●For a correct assembly of the child's seat on

the rear seats, adjust or dismount the headrest,

in order to prevent contact with the seat.

●If a semi-universal type chair is to be installed,

in which the method of attachment to the car

is through the seat belt and support bracket,

it should never be installed in the central rear

seat as the ground clearance is lower than in

other places and the support bracket will not

allow the seat to remain suciently stable.

●When ﬁtting a child seat on the front passen-

ger seat, the seat must be moved backwards

as far as possible and placed in the highest

position. The backrest must also be put in a

vertical position1).

Important information about the front pas-

senger front airbag

A sticker with important information about the

passenger airbag is located on the passenger's

sunshade blind and/or on the passenger side

door frame ›››Fig.39.

Read and always observe the safety informa-

tion included in the following chapters:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Tarraco 2023 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Tarraco 2023

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info