Bedienungsanleitung Seat Tarraco 2023 (Seite 76 von 408) (Englisch)

817362

Zoom out

Zoom in

Vorherige Seite

1/408

Nächste Seite

High-voltage battery

●Charging cable for domestic power sock-

ets: The protection device performs a self-test

›››page80.

●With the vehicle unlocked, the battery charg-

ing cover opens when it is pressed ›››Fig.55.

●Plug the charging connector into the charg-

ing socket. Check that the charging connector

is fully plugged in.

The connector locks automatically.

The LED (charging process display) on the

charging socket lights up 1. The indicator

lamp lights up on the instrument cluster dis-

play.

You can set the charging as required in the info-

tainment system ›››page77.

Automatic start of the charging process

If programmed charging is not activated, the

charging process starts immediately. The exter-

nal charging infrastructure must be active.

Most public charging stations require authenti-

cation to start the process. It is important to ver-

ify that the authentication has been performed

correctly, otherwise it could cause a system

malfunction.

During the charging

The indicator lamp ﬂashes green on the in-

strument cluster.

The charging process indicator on the charging

socket ﬂashes green 1. The charging connec-

tor is locked.

If the charging process indicator lights up red,

there is a fault ›››page74.

Interrupt the charging process

The charging process can be interrupted:

● Unlock the vehicle.

●Press the immediate charge button

›››Fig.59 1 . The charging connector remains

locked.

●Unlock the vehicle to unlock the charging

connector. The charging process can continue

by pressing the immediate charge button again

To restart the charging process just press the

function button to start the charging process.

After charging

When the high-voltage battery is fully charged,

the charging process display on the charging

socket lights up green.

●Unlock the vehicle.

●Unplug the charging connector from the

charging socket within 30 seconds.

●Disconnect the charging cable from the

power supply and replace the protective cap.

●Close the charging cover and make sure you

hear it click into place.

First charge and charging after a long time

If the high-voltage battery is new or has

not been charged for a long time, the maxi-

mum charge level of the battery can only be

reached after several charging processes. This

is for technical reasons and is not a vehicle

malfunction.

If the vehicle is not used for a long period of

time, the high-voltage battery must be charged

at least once every four months.

Note

If you leave the charging cable connected

after charging, the vehicle's electrical con-

sumers will not drain the high-voltage bat-

tery.

Charging process display

Valid for: hybrid vehicles

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Tarraco 2023 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Tarraco 2023

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info