Bedienungsanleitung SEG CR 114ROUND (Seite 19 von 29) (Deutsch, Englisch)

491142

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

TO USE THE MEMORY SET (RADIO PRESET) FUNCTION

This clock radio features a total of 5 preset memory of FM radio .These allow you to preset your

favorite stations and access them quickly.

1. Turn on the radio by press of RADIO / SLEEP. Press or to select a radio station you

like to preset memory.

2. Then press and hold the MEMORY until “MEM” appears and “01” flashes below the time digits.

3. Then press MEMORY again to store Memory 01.

4. Press or to select another station you like to preset. Then press and hold MEMORY

until “MEMORY” appears and “01” flashes below the time digits. Press + or – button to select

“02” on the lower display, and then press MEMORY again to store.

5. Repeat Step 4 to preset up to five FM stations.

6. To listen to a preset station at any time, simply press the MEMORY to select a preset station

while the radio is on.

7. To edit a preset station, select another station and then repeat Step 2-4. This overrides the

original setting.

TO USE THE SLEEP TIMER

1. Press the RADIO/SLEEP button twice to enter the sleep mode. The clock display shows the

SLEEP icon and “5” (5 minutes) and flashes keep pressing the RADIO/SLEEP to select a 10-,

15-, 30-, 45-, 60-, 75-, 90-minute sleep timer. The sleep timer display remains for few seconds

and then returns to normal clock display. The SLEEP icon will appear, showing the radio timer is

activated.

2. The radio will play for the programmed sleep time and then shut off. To check how many sleep

time is remaining, press RADIO/SLEEP button once.

3. To turn off the radio before the sleep time has elapsed, press SNOOZE/LIGHT once.

TROUBLE SHOOTING

If your clock displays irrelevant time or does not function properly, which maybe caused by electro-

static discharge or other interference, use a thin object to press the RESET button on top. The clock

radio will be reset to default settings and you need to set it again.

CARE OF YOUR PRODUCT

1. Place your clock radio on a stable surface, away from sources of direct sunlight or excessive

heat or moisture.

2. Protect your furniture when placing your units on a natural wood and lacquered finish by using a

cloth or protective material between it and the furniture.

3. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents such

as Benzine, thinner or similar materials can damage the surface of the unit. Make sure the unit

is unplugged before cleaning.

4. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable

(nickel-cadimium) batteries.

5. If the unit is not to be used for a prolonged period, such as a month or longer, remove the

batteries to prevent possible corrosion. Should the battery compartment become corroded or

dirty, clean the compartment thoroughly and replace the batteries.

Aux Line-in

When connecting to external audio source through AUX Line-in,please use supplied connection cable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

SEG CR 114ROUND Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info