18
Michigan 81cm LED BLU-TV
Use up/down keys to select program edit. Press OK or
Right button to enter the menu. Use up/down buttons to
navigate through the menu
Delete
Press the RED button to delete the highlighted channel, a
red circle will appear next to the channel name.
Press the RED button again to conrm delete.
Press the MENU to return to the main menu.
Move
Press to select the channel, press yellow button to
enter the move mode, then press to move the chan-
nel location, press yellow button again or press OK to
conrm.
Press MENU to return to the main menu.
Skip
Press to select the channel you wish to skip.
Press the BLUE button, a logo will appear next to the
channel name and the channel will be skipped when you
scroll through the channels.
Press the BLUE button again on the highlighted channel
to disable the skip function. Press MENU to return to the
main menu.
Rename (Only available in ATV)
Modify current channel name.
Press the button to enter RENAME mode, then use
the buttons to change name. Press the green
button, the OK button or the menu button to conrm.
Signal Information
Only available in DTV mode, Signal Information includes:
channel /network/modulation/quality /strength.
Cl Information
When insert CI Module, display CI Information.
Note: The following reception types or reception com-
binations are possible: ATV, DVB-C, DVB-S(S2), DVB-T,
ATV and DVB-C, ATV and DVB-S(S2), ATV and DVB-T. The
simultaneous reception of DVB-C, DVB-S(S2) and DVB-T
channels is not possible.
Power-Off-No-Signal-Down
If no valid input signal is detected, the TV set will toggle to
standby mode automatically after approx. 10 minutes.
Auto-Power-Down
4 hours maximum after the last user interaction and/or
the last channel switching, the TV set will automatically
toggle from On to standby mode. Prior to this automatic
toggling, a message will be displayed allowing you to
extend the delay time for another 4 hours.
Guide (EPG – Electronic Program Guide)
Press the GUIDE button on the remote control to open
the Electronic Program Guide. EPG contains a 7-day
programme preview as long as the selected channel
supports this function. If there is more information about
a programme, press the M and m buttons to scroll
through the pages. Please note that the maximum view-
able number of characters is limited.
Favourite Lists
Select the desired channel and press the green (Fav) but-
ton to add it to the list of favourite channels. To remove a
channel from the favourite list, select the desired channel
and press the green (Fav) button. You can display your
favourite list by pressing the green (Fav) button. You can
create an own favourite list for each tuner module.
Dish Setup
1. If you do not have a xed dish aligned to Astra 19.2E
tted with universal LNB you will need to use this
section.
2. If you have a xed Dish aligned to a different Satellite
or with a different LNB you will need to use this sec-
tion.
3. If you have a motorised Dish with a DiSEqC rotator
and wish to tune more than one satellite you will need
this section.
4. If you are on a DiSEqC switch system you will need
this section.
The rst 2 installations can be done by most people so
long as you know what satellite your dish is aligned with
and what type of LNB it is tted with.
Installation of 3 & 4 require an experienced user or
engineer.
PROGRAMME EDIT
