.
Cable Installation
"
Notice for Maintenance and Safety"
.
1.Take the LCD TV from the wrapping package and put it in a drafty and LCD
place.
- Before the installation and use, please read carefully the relevant content in
Notice:
make sure that the AC power has been already shut down; when unplugging
the power cable or signal cable, please hold the plug(the insulated part), do
not draw the body of the cable.
2.The RF output terminal can be connected with the RF input port of the TV.
3.The output AV terminal of DVD can be connected with the AV input port of
the TV through AV cable.
4.Connect one end of the VGA cable with the VGA port on computer, connect
the other end of the VGA cable with the VGA port on the TV, and tighten the
bolts clockwise on the each end of VGA cable.
Notice:
While connecting the 15-pin VGA, please do not insert the plug overexertedly,
for fear the pin might be broken.
5.Connect one end of the HDMI cable with HDMI output port, connect the other
end of the HDMI cable with the HDMI port on the TV.
Notice:
for fear the pin might be broken.
While connecting the HDMI,please aim at carefully,do not insert overexertedly,
6.Check and make sure that all AV cables are connected with the corresponding
ports correctly.
not connect the TV power input port with the AC power out of the above range.
Please hold the insulated part of the plug when you are unplugging the power
cable, do not touch directly the metallic part of the cable.
Introduction
When you plug or unpluy the LCD TV,computer or other equipments, you must
Caution:The range of power input for the LCD TV is 100V~240V/50Hz-60Hz, do
7.Connect the AC power cable with 100V~240V AC power supply.
