Bedienungsanleitung Seiko 6R64 (Seite 4 von 16) (Englisch)

757380

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Names of the parts and their functions

1Minute hand

2Hour hand

3Power reserve indicator

4Seconds hand

5Date hand

624-hour hand

7Crown

• Normal position (not locked): Wind up the

watch (hand-wound)

• First click position: Time difference

adjustment/Date setting

• Second click position: Time setting

* The position and design of the display may vary depending on the model.

* The direction of the power reserve indicator is different depending on the model.

EN 9

HOW TO USE

Crown

There are two types of crowns, a normal crown and a screw down crown.

Please check the type of the crown of your watch.

While

pressing the

crown in, turn it

in the direction

indicated by

the arrow.

The

crown

turns.

The crown

does not

turn.

Normal crown

Pull out the crown and operate it.

Screw down crown

Unlock the crown before

operating it.

After operating the crown,

lock it.

Unscrew

Rotate while

pressing

the crown in.

* By locking the crown by screw, a screw down crown can prevent malfunction and increase water resistance.

* Be careful not to screw the crown in by force as it may damage the slots of the crown.

EN 10

HOW TO USE

How to wind the mainspring

• This is an automatic mechanical watch with a manual winding mechanism.

• When the watch is worn on the wrist, the mainspring is wound automatically through normal wrist

movement. The watch can also be wound up by turning the crown.

• To start the watch after it stops completely, wind it up either by turning the crown or swinging it from side

to side until the seconds hand starts moving. Then, set the time and date before putting the watch on

the wrist. To wind up the watch, turn the crown clockwise slowly. The watch cannot be wound by turning

the crown counterclockwise. In this way, the watch can be wound up fully. Furthermore, turning the crown

further will not break the spring.

* For the watch with screw down crown, please unlock the crown before operating it and be sure to lock the crown

after operating it.

• Wind the mainspring until the power reserve indicator shows a fully-wound state. Once the watch is

wound up fully, it operates for about 45 hours.

* To check the winding state of the mainspring, refer to “Power reserve indicator” → P.13.

EN 11

HOW TO USE

* If the watch is used without being wound up fully, gain or loss of time may result. To avoid this, wear the watch for

more than 10 hours a day. If the watch is used without being worn on the wrist, be sure to wind it up fully every day

at a fixed time.

* If you use a watch that has stopped with the mainspring unwound, winding the mainspring with the crown will not

start the watch immediately. That is because the mainspring torque or force is low at the beginning of its winding

due to the characteristics of mechanical watches. The seconds hand will start to move when a certain degree of

torque is reached after the mainspring has been wound up. However, swinging the watch from side to side to

forcibly turn the balance can start the watch sooner.

EN 12

HOW TO USE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seiko 6R64 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seiko 6R64

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info