757413

Seiko 7B62 Seite 16

16
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
How to conduct manual reception (Receive a radio
signal manually)
The antenna is embedded at the
9 o’clock position of the watch.
Turning the antenna toward the
outside of a window helps
improve radio signal reception.
Press and
hold for
3 seconds
1
Place the watch.
Place the watch where it can easily receive a radio signal.
“To improve radio signal reception” → P.23
“Environments in which it is difficult to receive a radio
signal” → P.24
*
The watch cannot receive a radio signal outside the radio
signal reception range. “Radio signal reception range
indication” → P.18
2Continue to press and hold the button for
3 seconds, and then release it when the
seconds hand moves to the 0-second position.
Reception starts after the seconds hand moves and stops
at the 0-second position.
*
When the time difference is set for a region other than radio
signal reception range, the seconds hand does not move to
the 0-second position. (A radio signal cannot be received
manually.) Check the time difference set currently.
“Setting the time difference (Setting the radio signal
transmitting station)” → P.29
EN 56
7
TROUBLESHOOTING
3
Place the watch and wait for a few minutes (max. 12 minutes).
When the seconds hand moves at the one-second interval, the reception is finished.
<Display until the reception is finished>
The seconds hand indicates the reception level. (Updated
every minute)
Reception level High : H Low : L
Display
Receiving state of
a radio signal Easy to receive Difficult to
receive
* In conjunction with the seconds hand movement, the minute
hand advances by one minute.
<If the reception has failed>
The seconds hand indicates the reception result “N.”
Reception result : N
After 5 seconds, the watch switches to the time display
mode.
“If reception has failed: The seconds hand points to N”
→ P.27
4
When the seconds hand starts to move at one-second intervals, check that the reception is successful.
When the reception is finished, check that the reception is successful.
“How to display the reception results” → P.26
* During movement of the date, neither the button nor the crown can be operated.
It takes time to receive a radio signal (max. 12 minutes).
* The required time varies depending on the receiving state of a
radio signal.
EN 57
7
TROUBLESHOOTING
When a radio signal cannot be received
When a radio signal cannot be received, refer to the following pages:
•Not receivable within the radio signal reception range
Check that the time difference of the area where the watch is used is set.
When the time and date are misaligned even after the time difference is correctly selected, refer to
Troubleshooting. “Reception of a radio signal” → P.71
Since a radio signal cannot be received, the time and date became misaligned. In this case, set the time
and date manually.
“How to manually set the time” → P.59
“How to manually set the date” → P.61
* For the radio signal reception ranges, refer to “Radio signal reception range indication” → P.18.
•When the watch is used outside the radio signal reception range
Select the time difference of the area where the watch is used.
“Setting the time difference (Setting the radio signal transmitting station)” → P.29
When the watch does not display the correct time and date even after setting the time difference, manually
set the time and date.
EN 58
7
TROUBLESHOOTING
■ How to manually set the time
If the watch is continually used in an environment in which a radio signal cannot be received (a region other than the
radio signal reception ranges, etc.), set the time manually.
“Radio signal reception range indication” → P.18
•
When the watch is used in an environment in which a radio signal can be received again, receive a radio signal to
set the time. “Automatic reception and manual reception” → P.17
•
When adjusting the time, the date will be accordingly adjusted.
* Even if a radio signal cannot be received, the watch can be used with the same accuracy as that of a normal quartz watch.
(Average gain/loss ±15 seconds per month)
* When the watch receives radio signals after the time is manually adjusted, it displays the time received from radio signals.
01 2
Pull out the
crown to the
second click
1
Pull the crown to the second click.
The seconds hand stops on the spot.
*
When the crown is a screw lock type, unlock it. → P.13
EN 59
7
TROUBLESHOOTING
… 16 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Seiko 7B62 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info