49
SEIKO Cal.7K32 is a multi-function analogue watch equipped with an atmospheric pressure sensor.
The watch can measure the atmospheric pressure from 500hPa to 1050hPa in 1 hPa increments.
The measured atmospheric pressure is indicated by the two atmospheric pressure hands.
The watch automatically measures the atmospheric pressure at 10-minute intervals. It can also be
set to measure it at 5-second intervals.
The watch automatically retains in memory the minimum atmospheric pressure obtained, from which
you can know the maximum altitude using the altimeter scale.
The atmospheric pressure change indicator indicates the extent of change in the atmospheric
pressure compared to the measurement made 3 hours earlier using a scale divided into 10 grades.
Two types of alarm functions, regular and single-time alarms are provided.
The hour and small alarm hour hands can be adjusted independently with other hands. When you
travel abroad, the times of places you visit can be easily shown while the 24-hour hand indicates the
time back home.
Please note that the time difference adjustment function can serve the purpose only
among the time zones where the time difference from GMT is represented in one-hour increments.
The small second hand moves at two-second intervals when the battery needs to be replaced.
CAUTION
BE SURE TO OBSERVE THE FOLLOWING
FEATURES
50
This section briefly explains the watch operation. For details, refer to the corresponding sections of
the instruction manual.
[Time setting, alarm hand setting and adjustment of the barometer hand position]
Pull out crown “1” to the second click.
(1) Time setting:24-hour hand (Turn crown “1”.) Minute hand (Turn crown “1”.)
Hour hand (Turn crown “2” at the second click.)
(2) Alarm hand setting:Alarm hour and minute hands (by pressing button A)
(3) Adjustment of the barometer hand position:Barometer hand 1 (Press button B.)
Barometer hand 2 (Press button C.)
Push crown “1” back in to the normal position.
Pull out crown “1” to the first click.
(1) Date setting:(Turn crown “1” counterclockwise.) Push crown “1” back in to the normal position.
[Time difference adjustment]
Pull out crown “2” to the second click.
(1) Time difference adjustment of the
hour hand(Turn crown “2”.)
(2) Time difference adjustment of the
alarm hour hand(Press button A.)
Push crown “2” back in to the normal position.
[Alarm engagementdisengagement]
Pull out crown “2” to the first click.
(1) Regular alarm time setting:(Press button A.)
(2) Engagement of the regular alarmPush crown
“1” back in to the normal position.
Keep crown “2” at the normal position.
(1) Single-time alarm time setting:(Press button A.)
