Bedienungsanleitung Seiko 8L55 (Seite 5 von 12) (Englisch)

757422

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

■ Structure of the case

In the following types of models, take care of the following issues in usage.

The bezel or protective outer case is securely fastened to the watch with setscrews.

Never loosen the setscrews.

setscrew setscrew

* The above illustration is provided as an example, therefore it may not be exactly the same as your watch.

bCAUTION

Never loosen the setscrews used to fix the bezel or protective outer case.

Doing so may cause damage or result in further loosening.

* If you find that the setscrews have become loose or are functioning abnormally, consult the retailer from whom

the watch was purchased or SEIKO CUSTOMER SERVICE CENTER.

EN 13

HOW TO USE

Mechanical watch characteristics (Hand-wound, auto-wound)

• This is a mechanical watch powered by a spring.

• To use it from a stopped state, turn the crown 20 turns by hand to wind up the spring before starting the

watch.

• Although the accuracy of quartz watches is measured in differences over months or years, in mechanical

watches it is measured in differences per day (i.e., the amount the watch speeds up or slows down in a

single day).

• Additionally, mechanical watches are subtly affected by the conditions in which they are used (e.g.,

duration worn, temperature, arm movement, the amount wound, etc.) ; thus, the amount of error is not

constant.

• When affected by a strong magnetism from outside, a mechanical watch may lose/gain time temporarily.

The parts of the watch may become magnetized depending on the extent of the effect. In such a case,

consult the retailer from whom the watch was purchased since the watch requires repair including

demagnetizing.

EN 14

HOW TO USE

Names of the parts and their functions

1Minute hand

2Hour hand

3Seconds hand

4Date

5Rotating bezel

6Crown

• Normal position (not locked):

Wind up the watch (hand-wound)

• First click position: Time

difference adjustment/ Date

setting

• Second click position: Time

setting

EN 15

HOW TO USE

Screw down crown

The screw down crown features a mechanism that can securely lock the crown when it is not

being operated in order to prevent any operational errors and to improve its water resistant

performance.

•It is necessary to unlock the screw down crown before operating it.

•Once you have finished operating the crown, make sure to relock it.

【To unlock the crown】

Turn the crown counterclockwise to unscrew it.

Now the crown can be operated.

【To lock the crown】

Turn the crown clockwise while gently pressing it in

toward the watch body until it stops.

Crown locked

Unlock the crown before

operating it.

Crown unlocked After operating the crown,

lock it.

Unscrew Rotate while

pressing

the crown in.

* When locking the crown, turn it slowly with care, ensuring that the screw is properly engaged. Be careful not to

push it in forcefully, as doing so may damage the screw hole in the case.

EN 16

HOW TO USE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seiko 8L55 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seiko 8L55

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info