Bedienungsanleitung Seiko 9S86 (Seite 12 von 25) (Englisch)

757452

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

HOW TO USE (FOR CAL. 9S85, 9S68, 9S65, 9S27)

How to wind the mainspring

○ This watch is an automatic winding type (with manual winding function).

○ The mainspring can be sufficiently wound automatically by natural movement of the arm

while normally worn on the wrist. In addition, it can be wound by turning the crown.

○ A stopped watch can be started by arm movement when it is worn on the wrist, however,

before wearing the watch, wind the mainspring sufficiently and set the time and date. When

winding the mainspring, turn the crown at the normal position clockwise (12 o’clock

direction) slowly. If you turn the crown counterclockwise (6 o’clock direction), it will turn

free.

The mainspring is sufficiently wound when the crown is turned approximately 45 times for

Cal. 9S85, 60 times for Cal. 9S68 and 9S65, and 30 times for Cal. 9S27. When the

mainspring is in the full-winding state, it is designed so that the mainspring slips if it is

overwound. Therefore, it is not necessary to worry about breaking the mainspring,

however, please refrain from excessive operation.

* It is recommended that you wear the watch on your wrist more than 10 hours a day to keep

the mainspring wound up. If the mainspring is not wound up sufficiently, the watch may

lose or gain time. If you do not wear the watch on your wrist, wind the mainspring up

sufficiently by turning the crown by hand every day at a fixed time.

bCAUTION

○ Do not set the date between 10:00 p.m. and 1:00 a.m. (between 11:00 p.m. and 1:00 a.m.

for Cal. 9S27).

If the date is set during this period of time, the date may not change when the next day

comes, or this may cause damage.

○ Due to its gear train mechanism, for setting the time of the mechanical watch correctly, the

hands should be set back once slightly and then set forward to the correct time.

How to set the time and date

This watch is equipped with the date display function. The date changes once every 24 hours

at around midnight.

Therefore, if the a.m./p.m. is incorrectly set, the date will change around 12:00 p.m.

2The date can be set by turning the

crown clockwise (12 o’clock

direction).

First turn the crown clockwise until

the previous day’s date from the

desired date appears.

1Pull out the crown to the first click.

First click position

(If the watch is equipped with the

screw down crown, unscrew the

crown before pulling it out.)

【Ex.】If you want to set the date

to “6,” set the date to “5”

by turning the crown

clockwise.

20 HOW TO USE

HOW TO USE (FOR CAL. 9S85, 9S68, 9S65, 9S27)

3Pull out the crown to the second click when the seconds hand is at the 12 o’clock position.

(The seconds hand stops.)

Turn the crown counterclockwise (6 o’clock direction) to rotate the hands clockwise until

the desired date appears. When the date changes, the time is a.m. Further turn the crown

to set the current time.

Normal position

First click

position

Second click

position

4Push the crown back into the normal

position in accordance with a time

signal. The watch starts operating.

bCAUTION For models with a screw down crown, remember to screw the crown

in.

Date adjustment at the end of the month

It is necessary to adjust the date after February (which has 28 days, 29 days in a leap year)

and a 30 day month.

【Ex.】To adjust the date in the a.m. period on the first day of a month following a 30-day

month

On the first day, “31” is displayed. Pull out the

crown to the first click. Turn the crown

clockwise (12 o’clock direction) to set the

date to “1”, and push the crown back in to the

normal position.

First click position

bCAUTION For models with a screw down crown, remember to screw the crown

in.

HOW TO USE

HOW TO USE (FOR CAL. 9S85, 9S68, 9S65, 9S27)

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seiko 9S86 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seiko 9S86

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info