Bedienungsanleitung Seiko H851 (Seite 12 von 17) (Englisch)

757461

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

If the battery level falls to “BATT 6” or below, try to charge the battery.

Battery level

indication

Restrictions on operations and

functions What should you do?

1BATT 10 -

BATT 7

None.

Use the watch normally.

2BATT 6 -

BATT 4 Try to charge the battery. → P. 37

3BATT 3 -

BATT 2 Sufficiently charge the battery until it

reaches 1. → P. 37

After charging the battery, use the watch

normally.

4BATT 1

The light will not turn on.

The alarm tone/operation confirmation

sound will stop.

5BATT 0

(All off)

Sufficiently charge the battery until it reaches 1. → P. 37

* If irregular movement occurs, reset the system. → P. 61

* All function settings will be reset and the standard hand position data will also be lost.

After restoring the watch from BATT 0, follow the procedures in “How to set the time and

date” → (P. 23) and “How to set the standard hand position” → (P. 26).

EN 40

Solar Charging Function

■ Power saving/sleep function

If the dial is not exposed to light and the buttons are not operated for a certain period of time, the

power save function activates.

●Power save mode

If the dial is not exposed to light and the buttons are

not operated for more than two hours, power save

mode will be enabled.

When the watch is in power save mode, the “PS”

symbol will flash.

●Sleep mode

If the dial is not exposed to light and the buttons are

not operated for about three days, sleep mode will

be enabled.

When the watch is in sleep mode, the “SL” symbol

will flash.

* During sleep mode, the stopwatch count will be reset

and the alarm tone will be turned off.

●Turning off the power save/sleep function

Performing one of the following operations will turn off the power save/sleep function:

• Expose the watch to light

• Operate any button

• Pull out or push in the crown

EN 41

Solar Charging Function

Daily care

●The watch requires good daily care

• Do not wash the watch when its crown is in the extended position.

• Wipe away moisture, sweat or dirt with a soft cloth.

• After soaking the watch in seawater, be sure to wash the watch in clean pure water and wipe it dry

carefully.

Do not pour running water directly from a faucet onto the watch. Put some water into a bowl first, and

then soak the watch in the water to wash it.

* If your watch is rated as “Non-water resistant” or “water resistant for everyday life”, do not wash the watch.

“Performance and type” → P. 43

●Turn the crown from time to time

• In order to prevent corrosion of the crown, turn the crown from time to time.

• The same practice should be applied to a screw down crown.

“Screw down crown” → P. 18

EN 42

TO PRESERVE THE QUALITY OF YOUR

WATCH

Performance and type

The case back shows the caliber and performance of your watch

Water resistant performance

Case NumberMagnetic resistant

performance

•Water resistant performance

•Case Number

The number to identify the type of your watch.

•Magnetic resistant performance

Refer to pages P. 47 and P. 48.

* The above illustration is provided as an example, therefore it may not be exactly the same as your watch.

EN 43

TO PRESERVE THE QUALITY OF YOUR

WATCH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seiko H851 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seiko H851

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info