Bedienungsanleitung Sekonic L-558 (Seite 2 von 2) (Englisch)

528682

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Advanced Functions - Sekonic L-558

Motion Picture (CINE)

Turn JOG WHEEL (in T Priority Mode) past shutter speeds

8000, 1/200, 1/400 to select f/s (frames per second). Press

measure button.

Averaging Function

After two or more measurements are memorized, toggle

AVE/ key. Averaged exposure will be displayed in digital

and analog readouts. Operates in all measuring modes.

Brightness Difference Function

Can be used in all modes (incident, reflected, ambient and

flash). Take measurement(s), press the AVE/ button

will display. Press and hold down the Measure button. The

difference between the last memorized reading or averaged

reading and new area measured is displayed in +/- 1/10th

steps of EV.

Flash Analyzing

In all flash modes: Take a flash measurement. A combined

reading of both ambient and flash will be displayed. Turn the

JOG WHEEL to adjust ratio between ambient and flash.

Adjust aperature and shutter as required on camera.

EV Readout - Option 5 in Custom Settings Chart

Select item O (EV) in the CS software settings to turn "ON"

EV mode. Select Ambient Mode. Hold down Mode key and

turn JOG WHEEL until EV readout shows. Press measure

button.

Multi Flash Mode - Option 6 in Custom Settings Chart

Hold down Mode key and turn JOG WHEEL to select Cord,

Cordless or Radio Trigger Mode with MLT shown on display.

Trugger flash repeatedly until target f/stop is achieved.

Exposure Compensation

Hold in both ISO 1 and ISO 2 simultaneously and turn the

JOG WHEEL to exposure compensation needed between

+/- 9.9 EV.

Calibration

Meter must turned off. Tap Power button once while holding

in ISO 1 and ISO 2 keys. CAL will be displayed on panel.

Turn the JOG WHEEL while holding down both ISO keys to

compensate between +/- 1.0 EV.

Quick Guide to the Sekonic L-558

Basic Operation - Sekonic L-558

On/Off

Press down power key to turn on meter. Battery icon will

appear Monitors Battery level. Press and hold Power key

to turn off.

Set ISO 1 or ISO 2

Hold down ISO 1 or ISO 2 while turning the JOG WHEEL.

1° Spot meter mode

Turn SPOT/INCIDENT SELECTOR SWITCH to to select

Spot. Press measure button.

Incident meter mode

Turn SPOT/INCIDENT SELECTOR SWITCH to to select

Incident. Turn Lumisphere retracting ring counter-clockwise

to the full UP right position. Press measure button.

Measure Brightness / Contrast Difference

Turn Lumisphere retracting ring clockwise to lower the

Lumisphere to the DOWN position. Select measuring mode

then press measure button.

Ambient Reading

Select Ambient Mode by holding down the Mode key and

turning the JOG WHEEL. Press the measure button.

Cord Flash Reading

Select Cord Flash Mode. Connect flash cord. Press

measure button,to trigger flash and measure light.

Cordless Flash Reading

Select Cordless Flash mode. Press measure button, trigger

flash manually, meter measures light, automatically resets.

Radio Triggering Mode (with optional RT-32 Module)

Turn power OFF. Remove Connector cover inside battery

compartment. Insert optional RT-32 Module. Turn Power

ON. Hold MODE key in while turning the JOG WHEEL to

RADIO FLASH TRIGGERING MODE, a blinking channel

number will appear. Turn JOG WHEEL to select channel

number. To select Quad-Triggering sub-channels , , , ,

simply press the direct function keys: AVE/ , ISO 1 ,

ISO 2 or M.Clear on the control panel. Pressing the

measure button once returns the screen to the main menu.

Pressing the measure key again simultaneously fires flash

and measures light.

Memory Function

Take measurement, press Memory button. Up to nine

readings can be stored and displayed on the analog memory

scale by repeating the procedure. A tenth measurement can

also be displayed.

RETRACTABLE

LUMISPHERE

RING

1° SPOT

SPOT/INCIDENT

SELECTOR SWITCH

MEMORY

ON/OFF

ISO 2

MODE KEY

Press while turning JOG WHEEL for:

JOG WHEEL

FLASH CORD

SOCKET

MEMORY CLEAR

BUTTON

1/4” TRIPOD

SOCKET

AVERAGE /

BRIGHTNESS

DIFFERENCE

DIOPTER

CORRECTION

RING

MEASURE

BUTTON

AUTO RESET CORDLESS FLASH MODE

DAYLIGHT / AMBIENT MODE

FLASH W/CORD

OPTIONAL PLUG-IN RADIO FLASH TRIGGERING

- - - - - - - - - ->

- - - - - - -

Key Lock and Unlock:

Hold MODE key in. Toggle ISO 1 key to lock or unlock.

“LOc” will display briefly.

ISO 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sekonic L-558 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sekonic L-558

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info