15
4. Keep the CHANNEL button pressed on the base station until the display for weather data
OUT flashes.
The base station will now access the weather data for all available radio sensors.
Base station
1. Fold open the battery compartment lid.
2. Insert two type LR6 / 1.5 V batteries, as shown on the base of the battery compartment. Pay
attention to the correct polarity (+/-).
3. Reattach the battery compartment lid and fold it shut.
4. Wait for approx. 30 minutes. The base station requires this time in order to gather all of the
weather data and receive radio signals from the time indicator signal.
Setting air pressure
The air pressure depends on the altitude, i.e. in the mountains, there is lower air pressure than
in lowlands. For the proper function of your weather station, you therefore need to enter the
current air pressure value of your device location. You can obtain information on this on the
Internet or from the local authorities of your town or municipality. When you have entered the
current (related to sea level) air pressure in the weather station, this always shows the sea-level-
related air pressure of the location.
1. Keep the SET/BARO button pressed until the display that shows the air pressure begins to
flash.
