Bedienungsanleitung Sencor SBG 2051 (Seite 7 von 12) (Englisch)

758876

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Contact Grill

SBG 2050SS / SBG 2051BK / SBG 2052RD / SBG 3050SS / SBG 3051BK / SBG 3052RD

EN-7

2015 08/2015

USING THE CONTACT GRILL

• Locate the grill on a dry, even and stable surface from a heat resistant material.

GRILLING WITH THE TOP PLATE TILTED DOWN

• Before putting the grill into operation, set the angle of the bottom grill plate A7. Fold out the feet

A9 to set the angle of the bottom grill plate A7 to enable better drainage of fat and juices into

the drip tray A8. The bottom plate A7 will be tilted slightly backwards. If you leave the fold-out

feet A9 folded in, the bottom plate A7 will be in a horizontal position.

• Check that the drip tray A8 is inserted in the underside of the grill and that it is pushed in all the

way.

• Smear the grill plates A6 and A7 with a small amount of vegetable oil that is suitable for cooking.

• Fully wind out the power cord and connect the grill to a power socket. Connection to a power

socket is signalled by the "Power" indicator A2 being lit.

• Allow the grill plates A6 and A7 to preheat. To speed up the preheating process, fold the top

plate A6 down on to the bottom plate A7. Upon reaching the operating temperature, the

"Ready" indicator A3 will be lit.

• Tilt open the top plate A6 so that it is in a vertical position. Use the handle A1 to tilt out the plate

A6. Place the food that you wish to grill (meat, hamburgers, ﬁsh, vegetables, etc.) or bake (paninis

or sandwiches) on to the bottom plate A7.

• Use the handle A1 to tilt down the top plate A6. The grill is designed in such a way that the

distance between the grill plates A6 and A7 adjusts to the food that is placed in between them.

When grilling, regularly inspect the state of the food and the capacity of the drip tray A8.

Note:

You may see a small amount of smoke when you turn on the grill for the ﬁrst time. This is caused

by certain components being heated up for the ﬁrst time. This need not disturb you.

During operation, the "Ready" indicator A3 will intermittently turn on and off. This signalises

that the operating temperature is being maintained.

Attention:

Be especially careful when handling the drip tray A8 containing hot liquid.

• When the food is cooked, tilt open the top plate A6 and use a plastic or wooden spatula to take

it off the grill plate A7. Do not use metal tongs or metal spatulas, knives or other sharp metal

kitchen utensils. This could cause damage to the non-stick coating of the grill plate A7.

• When you have ﬁnished, disconnect the grill from the power socket and allow it to cool down.

Then clean it out according to the instructions in chapter Cleaning and maintenance.

GRILLING ON AN OPEN GRILL

• The unique design of the grill enables both grilling surfaces A6 and A7 to be used at the same

time. To fully tilt open the grill, it is necessary to disengage the top plate lock A6 by pressing

button A4. Hold down button A4 while tilting open the top plate A6 so that the handle A1

leans against the workbench of the table and the top grill plate A6 is level with the bottom grill

plate A7, see ﬁg. B.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor SBG 2051 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info