Bedienungsanleitung Sencor SBL 2203 (Seite 7 von 10) (Englisch)

758749

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

Smoothie Maker

SBL 2200WH / SBL 2201GR / SBL 2202BL / SBL 2203OR / SBL 2204RD /

SBL 2205VT / SBL 2206YL / SBL 2207TQ / SBL 2208RS

EN-7

2016 10/2016

INTENDED USE AND FUNCTIONS OF THE APPLIANCE

• This Smoothie Maker is ideal for preparing fresh fruit or ﬁtness drinks, dairy and other sorts of

cocktails, mixed drinks, excellent salsa, cream soups, sauces and mixed baby foods. It is equipped

with a blade unit with four high-quality stainless-steel blades and a blending containers of two

sizes, which are made of sturdy PVC plastic and also serve as a practical drinking bottle. The lid

has a closable spout to allow easy carrying with no spilling. Both bottles ﬁt perfectly into a car

cupholder. Anti-slip feed with suction cups ensure excellent stability when the Smoothie Maker is

in use. The bottle, lid and blade unit are dishwasher safe.

BEFORE FIRST USE

1. Remove the appliance and its accessories from the packaging.

2. Thoroughly wash all removable parts intended for contact with food (large blending container

A1, small blending container A7, lid A6 and the blade unit A2) in warm water with a neutral

dish detergent. Then rinse them with clean water and let them dry or thoroughly dry them with

a soft towel.

Warning:

When cleaning the blade unit A2, be extra cautious to avoid injury. The blade edges A2 are

sharp.

ASSEMBLING AND DISMANTLING THE APPLIANCE

• Before you begin to assemble or disassemble the appliance, make sure the motor unit A3 is turned

off and unplugged from the wall outlet and the rotating parts are not in motion.

1. Assembling and dismantling the blending container

1.1 Turn blending container A1 or A7 so that its neck points upward.

1.2 Place the blade unit A2 against the neck of container A1 or A7 so that the blades point into

A1 or A7. Screw the blade unit A2 onto the neck of container A1 or A7. Turn the assembled

container downward with the blade unit A2.

Note:

Put food and liquids into container A1 or A7 before you attach the blade unit to it A2.

1.3 To dismantle, proceed in the opposite order.

2. Attaching and removing the blending container from the motor unit

2.1 Place the motor unit A3 on a ﬂat, dry surface, such as a kitchen counter. Onto the motor unit A3,

place the blending container so that the arrow indicator on the blade unit A2 lines up with the

arrow on the motor unit A3. Turn the blending unit clockwise until it attaches ﬁrmly to the motor

unit A3. If the blending container assembly is correctly attached to the motor unit A3, it cannot

be lifted separately.

2.2 To remove the blending container from the motor unit A3, proceed in the opposite sequence.

3. Assembling the drinking bottle

To assemble the drinking bottle, screw the lid A6 onto the neck of bottle A1 or A7. Firmly tighten

the lid A6. When carrying, make sure the spout is properly closed, so that the bottle’s contents do

not spill.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor SBL 2203 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info