Bedienungsanleitung Sencor SBL 3271 (Seite 8 von 12) (Englisch)

758825

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

EN-8

Blender

SBL 3271SS / SBL 3272RD

2015 11/2015

Attention:

The safety mechanism will prevent the appliance from being started unless the blending jar or

grinder assembly is properly attached to the motor unit A7.

3.2 To remove the blending jar or grinder from the motor unit A7, proceed in the reverse sequence.

OPERATING THE APPLIANCE

1. Using the blender

1.1 Make sure that the motor unit A7 is turned off and disconnected from the mains power socket.

1.2 Assemble the blender according to the instructions in chapter Assembling and disassembling the

appliance.

1.3 Place the food or pour the liquids that you wish to blend into the blending jar A3. Close the

blending jar A3 using the lid according to the instructions in chapter Assembling and disassembling

the appliance.

Note:

The maximum capacity of the blending jar A3 is 800 ml. We recommend that the blending jar is

not ﬁlled with more than 600 ml of liquids. Certain liquids increase their volume during mixing,

and therefore it is better to blend them gradually in smaller batches.

1.4 Connect the power cord to the power socket and set the speed dial A8 to the required speed

level of 1 or 2. Level 1 is slower and level 2 is faster. We recommend to ﬁrst set the slower speed to

allow the ingredients to mix together. Then you can increase the speed to level 2. While blending,

always use your hand to hold down the lid A2 from above. The pulse level is appropriate when

you wish to blend food only very quickly. To start the pulse level, turn the speed dial A8 to the

position "P" and hold it in this position for a moment. As soon as you release the speed dial A8, it

will automatically return to position 0 (Off).

Attention:

The maximum operating time is 2 minutes. Do not leave the appliance in continuous operation

for longer than indicated above. Then allow the appliance to cool down for 2 minutes. When

processing hard food or liquids with a very thick consistency, do not leave the appliance in

continuous operation for longer than 1 minute.

1.5 While blending, you may add food or liquids to the blending jar A3 through the hole i the lid A2

after removing the inner cap A1.

1.6 In the event that food is sticking to the blade assembly A5 or the walls of the blending jar A3,

turn the appliance off by turning the speed dial to position 0 (Off) and disconnect it from the

power socket. Make sure that the blade assembly A5 has stopped rotating. Carefully remove the

blending jar from the motor unit A7. Take off the lid A2 and using a plastic spatula clean the

blade assembly A5 and the walls of the blending jar A3. Put the lid A2 back on and reattach

the blending jar to the motor unit A7. Plug the power cord into a power socket and continue

blending.

1.7 After you have ﬁnished using the appliance, set the speed dial A8 to position 0 (Off) and disconnect

the power cord from the power socket. Check that the blade assembly A5 has stopped rotating

and take the blending jar off the motor unit A7. Use a soft plastic spatula to remove food from

the blending jar A3.

1.8 Disassemble the blending jar according to the instructions contained in chapter Assembling and

disassembling the appliance, and clean it according to the instructions in chapter Cleaning and

maintenance.

2. Using the grinder

2.1 Make sure that the motor unit A7 is turned off and disconnected from the mains power socket.

2.2 Place the food that you wish to grind up into the grinding jar A0. The grinder is suitable for

grinding nuts (with shells removed), coffee beans, spices, etc. The maximum amount of food

that can be placed in the jar A0 is indicated by the MAX mark. Do not overﬁll the jar A0.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor SBL 3271 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info