11/2017
- 6 -
Copyright © 2017, F
EN Glass Jug Blender
User'smanual
Prior to using this appliance, please read the user’
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’
Keep this user’s
We rec
receipt and responsibility statement of the vendor or warran
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original bo
from the manufacturer
DESCRIPTION OF
A1 Inner cap
can be used to add ingredients to
the blending jug while the blender
is running.
A2 Outer lid with ahole
After removing the cap you may
add ingredients into the blending
jug while blending.
A3 Glass blending jug with 1.5 l
capacity
A4 Gasket ring
A5 Blade assembly of the blending jug
with a4-blade titanium coated
stainless steel blade assembly
A6 Blending jug base
A7 Motor unit
A8 Control panel with display
A9 Anti-slip feet
A10 Grinding jug
A11 Gasket ring
A12 Grinding blade assembly
with 2 stainless steel blades
A13 Locking ring
A14 Cap with drinking spout
A15 Smoothie drinks bottle with 600ml
capacity
A16 Smoothie drinks bottle blade
assembly with safety tabs
with a4-blade titanium coated
stainless steel blade assembly
DESCRIPTION OF
B1 LCD displa
shows the speed, remaining time
until end of operation and the set
blending program.
B2 SPEED– button
it is used to set the speed.
B3 TIME button
it is used to set the blending time.
B4 STOP button
it is used to stop the appliance.
B5 SPEED+ button
it is used to set the speed.
B6 MENU button
it is used to select apreset blending
program.
B7 ST
it is used to start the blender.
PURPOSE OF USE
1. BLENDER
It is designed for blending meals and drinks such as creamy soups, sauces
spreads, baby food
2. GRINDER
It is designed for grinding nuts, herbs, spices and coff
3. SMOO
It is ideal for making nutritious smoothie drinks, milkshakes, cocktails, etc.
BEFORE FIRST USE
Remove all packaging materials, including promotional tags and labels from the
appliance and its accessories.
Thoroughly wash the removable acc
with food using warm water and aneutral kitchen detergen
clean water and allow them to dry naturally or dry them out thoroughly using
awiping cloth. All removA5 , A12 and A16
can be washed in a dishwasher (in the upper rack).
Do not rinse the motor unit A7 under water or submerge it in water
Attention:
When cleaning, be very careful not to injur
blade assembly A5 , A12 or A16 .
ASSEMBLING AND DISASSEMBLING
Before you start assembling or disassembling the appliance, check that the motor
unit A7 is turned off and disconnected from the pow
parts have come to acomplete stop
Place the motor unit A7 on a
countertop.
1. BLENDER
1.1 Place the gasket ring A4 on to the blade assembly A5 and insert it into the base
A6 from above. AA6 to the bottom part of the blending jug A3 by
screwing it anticlockwise.
1.2 Seat the outer lid A2 on to the neck of the blending jug A3 and push it down properly
so that it adheres to the neck along its entire perimeterA1 into
the outer lid A2 .
1.3 Place the blending jug assembled in this way on to the motor unit A7 fr
The blender is equipped with a
started unless the blending jug A3 is properly mounted on the motor unit A7 .
1.4 T
2. GRINDER
2.1 TA10 so that the opening faces upwards. Place the gasket ring
A11 on to the blade assembly A12 and then insert it into the grinding jug A10 with
the blades facing forward. Attach the blade assembly A12 to the grinding jug A10
by turning the locking ring A13 anticlockwise all the way.
2.2 Turn the assembled gA13 is on the bottom.
Seat it on the motor unit A7 from above and then turn it clockwise to secure it on the
motor unit A7 .
it from being started unless the grinding jug is properly attached to the motor unit
A7.
2.3 T
3. SMOO
3.1 Place the blade assembly A16 on to the neck of bottle A15 so that the blades are
pointing into the bottle A15 . Screw in the blade assembly A16 clockwise.
must be tightened in such a way that the safety tabs slide in. Otherwise, it will not be
possible to install it into the blender
3.2 TA16 is on the bottom.
Seat it on the motor unit A7 from above and then turn it clockwise to secure it on the
motor unit A7 .
it from being started unless the bottle is properly attached to the motor unit A7 .
Note:
The bottom of the bottle A15 has aA14 can be attached
so that you can have it with you at all times
3.3 T
4. SMOO
4.1 Screw the cap A14 on to the neck of the bottle A15 and tighten firmly.
it, make sure that the drinking spout is properly closed so as not to spill the contents
of the bottle A15 .
4.2 T
OPERA
1. Make surA7 is turned off and disconnected from the mains
power socket. Select the correct type of accessory depending on the purpose of use.
Place the ingredients that you wish t
assemble the appliance according to the instructions provided in chapter A
and disassembling the appliance.
the motor unit A7 to apower socket. W
appliance will switch to the stand-by mode.
Attention:
Do not fill any jug/bottle past the maximum mark.
TA3 should be filled to at least
¼ of its capacity.
2. TB7 . The operating time is
preset to 30 seconds and blending is set to medium speed. B1 shows
the speed level and the preset time.
buttons B2 and B5 .
elapsed. B4 .
3. In the stand-by modeB3 can be used to first set the blending time. W
button B3 is pressed for the first time, the time 10 swill appear on the display B1 .
Each time the button B3 is pressed again, time is increased by another 10 seconds
After reaching 60 s, the time setting will return to the beginningB2
and B5 to set the desired speed. B7 .
The display B1 will show the set speed and and time will count down until the end
of operation.
TB4 .
4. TB6 . T
on the display B1 and the icon of the current selected program will flash. Each time
the button is pressed, the progr
the STB7 . The display B1 will show the selected blending program.
In a
will automatically stop once the preset time has elapsed.
it is still running, press the STB4 .
Preset program Purpose of use
T
T
T
T
T
