Bedienungsanleitung Sencor SBS 8000 (Seite 5 von 7) (Englisch)

760057

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

10/2019

- 5 -

period of time (longer than

3 months), remove the bat-

teries. If the batteries were to

leak into the inner area of the

appliance, this could result in

its damage.

■Do not use rechargeable bat-

teries to power this appliance.

■Keep the batteries out of chil-

dren’sreach as they may pres-

ent ahazard. In the event that

achild swallows abattery, im-

mediately seek medical help.

■Keep the appliance clean.

When cleaning it, follow the

instructions in chapter Clean-

ing and maintenance. Do not

submerge the appliance under

water or any other liquid and

do not rinse it under running

water.

■Do not repair the appliance

yourself or make any adjust-

ments to it. Have all repairs or

adjustments performed at an

authorised service centre. By

tampering with the appliance,

you risk voiding your legal

rights arising from unsatisfac-

tory performance or quality

warranty.

DESCRIPTION OF THE SCALE

A1 Weigh unit toggle switch (not shown)

is located on the underside of the scale.

A2 Battery compartment (not shown)

is located on the underside of the scale.

A3 LCD display

A4 Weighing platform

from 6 mm thick hardened safety glass

A5 Metal electrodes

for measuring bone, fat and muscle tissue percentages and water

content in the body.

A6 Touch button ▲

A7 Touch button SET

A8 Touch button ▼

DESCRIPTION OF THE DISPLAY

B1 Personal user code

B2 Gender (male/female)

B3 Body water percentage

B4 Bone, fat and muscle tissue percentage

B5 Graphical representation of measured body fat percentage

B6 Imperial length unit

B7 Metric length unit

B9 Age

B9 Measurement result

B10 Percent

B11 Metric weight unit

B12 Imperial weight unit

B13 Unit of energy

PRINCIPLE OF THE MEASUREMENT OF THE

BONE, FAT AND MUSCLE TISSUE, AND WATER

PERCENTAGE SHARE IN THE BODY

■ This personal tness scale is equipped with afunction for measuring

and analysis of bodily parameters. Measurement of the bone, fat and

muscle tissue, and water percentage share in the body is based on the

bioelectrical impedance analysis (BIA) method. The BIA method enables the

determination of these values on the basis of electrical resistance of human

tissue that is measured using aweak electrical impulse. The percentages are

calculated based on dierences in the electrical resistance of the individual

tissues. The measured values cannot be added up.

■ The electrical impulse is sent and the response is received by metal

electrodes A5, which are located on the weighing platform A4 in such

away that the measuring circuit is completed when both feet stand on

the weighing platform A4.

POWER SOURCE

■ Two type AAA (2× 1.5 V) batteries are used to power this scale, and they are

included with the appliance. Remove the battery compartment cover A2

and insert the batteries into it. Ensure that correct polarity is maintained

and that the batteries properly t into place. Close the cover.

■ Replace the batteries when “Lo” (weak batteries) appears on the display A3

or when the display A3 does not light up when the weighing platform A4

is stepped on or the SET button A7 is pressed.

■ If you decide not to use the scale for an extended period of time (longer

than 3 months), remove the batteries.

Attention:

Use only type AAA batteries to power the scale. Do not

combine new and old batteries or use rechargeable

batteries.

USING THE SCALE

■ Place the scale on an even, smooth, hard and stable surface. Do not place

it on acarpet or any other soft surface, otherwise the weighing result may

be inaccurate.

■ When weighing yourself, stand still and do not lean. For weighing results

to be comparable, it is necessary to weigh yourself at the same time of day,

ideally in the morning. The weighing results are inuenced by the clothing

that you are wearing as well as the food and drink that you consume before

weighing yourself.

■ Weighing with measurement and analysis of body parameters requires

bare feet, whilst both feet need to be positioned on the electrodes A5.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor SBS 8000 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sencor SBS 8000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info