10/2016
- 5 -
Copyright © 2016, F
EN Super Blender
User'smanual
Prior to using this appliance, please read the user's
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user's
this user'smanual in asafe place where it can be easily retrieved f
We rec
and responsibility statement of the vendor or warranty card f
the legal liability for unsatisfactory per
we recommend that you pack the appliance in the orig
DESCRIPTION OF
A1 Inner cap
can be used to add ingredients to the blending jar while the blender is running
A2 Outer lid with hole
After removing the cap, y
blending or you may use the pusher attachment to speed up the blending proc
A3 2-litre blending jar
it is made from very durable plastic T
and does not contain toxic Bisphenol A.
A4 Six blade assembly
it is an integral part of the blender jar
A5 Safety mechanism
prevents the blender from being turned on when the blending jar is not correctly
seated on the motor unit.
A6 Silicone pad
A7 Motor unit
A8 Control panel with display
A9 Anti-slip feet
A10 Handle
A11 Pusher attachment
its length is designed in such away that after being inserted into the hole in the
outer lid, it will not come into contact with the blade assembly
A12 Cleaning brush
B1 T
B2 L
shows blending time and speed.
B3 T
B4 T
B5 T
B6 T
B7 T
B8 T
B9 T
B10 Touch button f
B11 Touch button ST
serves to start the blender.
B12 Touch button POWER
serves to turn the blender on and o or to stop the blender
PURPOSE OF USE AND
■ This multifunction blender represents a revolutionary solution in food processing.
Within a
such as fresh nutritious drinks, milkshakes, cream
baby food; you will grind meat, nuts or gr
outstanding creamy ice cream or sorbets.
■ Thanks to its powerful 1
and vegetables, including soft kernels and peels. In this way
valuable nutrients that are found in the pulp
digestible nutritious drink without having to laboriously cut the fruit and vegetables
into small pieces in advance.
pieces easier and will speed up the blending of frozen foods t
thawing.
blending or the preparation of hot meals in the blending jar thanks to steam release
holes in the lid. Its anti-slip feet provide stability to the blender during its operation.
BEFORE FIRST USE
1. T
2. A1 , outer lid
A2, blending jar A3 with blade assembly A4, and the pusher attachment A11, using
warm water and aneutral kitchen detergent.
thoroughly with ane wiping cloth.
Attention:
When cleaning the blending jar A3 , be very careful not to injure yourself on the
sharp edge of the blade assembly A4 .
ASSEMBLING AND DISASSEMBLING
1. Before you start assembling or disassembling the appliance, check that the motor unit
A7 is turned o and disconnected from the power socket and that the rotating parts
have come to acomplete st
2. A7 on a stable, even, dry surface, for example on a kitchen
countertop. Seat the blending jar A3 on to the motor unit A7 .
with a safety mechanism A5 that will pr
correctly assembled.
3. PA2 on to the blending jar A3 and rmly push it down along its entire
perimeter
4. Insert the inner cap A1 into the outer lid A2 and turn it all the way clockwise. This will
lock it in place.
5. T
OPERA
1. Make sure that the motA7 is turned o and disconnected from the mains power
socket. Place the ingredients that yA3 . Assemble
the blender according to the instructions in the chapter Assembling and disassembling
the appliance.
Attention:
T of
its capacity.
The maximum capacity of the blending jar A3 is 2 litres. Do not ll it past the
maximum mark.
If you wish to blend hot liquids, prepare so
A11 while blending, do not ll the blending jar A3 to more than .
2. A8 lights up for a
moment. B12 starts ashing.
turn on the blenderB12 . T
light up and the blending time 00:00 and speed level 4 will appear on the display
3. TB3 –4 andB7 –10 .
an overview of all the operating modes in chapter Quick guide to processing ingredients
TB11 . In all the operating modes, the blending speed
and duration are automatically regulat
hand to hold down the jar from above
acoustic signal will be made and the blender will automatically stop running. If you wish
to stop the blender soonerB12 . After being idle for two minutes, the
blender will automatically switch to the stand-by mode.
A8 will turn o and the button B12 will start ashing.
4. If you do not wish to take advantage of the available preset modes, you may use buttons
B1 and B6 to set the blending time and speed manually.
5. TB5 is used for running the blender at maximum speed in short
intervals. TB5 is pushed down. The maximum
continuous operating time in this mode is 1 minute.
6. While blending or after pausing, you may add ingredients inA3
through the hole in the lid A2 . WA1
must remain locked in place.
7. If while blending, the ingredients are not circulaA3 , remove
the inner cap A1 and use the pusher attachment A11 to push the ingredients to
the blade assembly A4 . TA11 is designed in such away that after
being inserted into the hole in the outer lid A2 , it will not come into contact with the
blade assembly A4 . Never put the pusher attachment A11 into the blending jar A3
unless it is closed with the outer lid A2 .
Attention:
The maximum operating time is 6 minutes.
minutes. After three consecutive cycles allow the applianc
15 minutes.
TA11
continuously for longer than 1 minute.
8. If ingredients stick to the blade assembly A4 or the inside walls of the blending
jar A3 , switch it o and unplug it from the power supply
assembly A4 has stopped rotating. CA3 from the
motor unit A7 .
A4 and the walls of the blending jar A3. Put the lid back on and seat the blending
jar A3 back on to the motor unit A7 . Plug the power cord into apower socket and
continue blending.
9. After you nish using it, disconnect the blender from the power socket. Check
that the blade assembly A4 has stopped rotating and take the blending jar A3
o the motor unit A7 . Use a
A3. Disassemble and clean the appliance according to the instructions in chapter
Cleaning and maintenance.
BUIL
■ The thermal fuse protects the motor against overheating. If the appliance automatically
turns o during operation, unplug the power cord from the po
blending jar A3 o the motor unit A7 and check that the blade assembly A4 is not
blocked by ingredients inside of the blending jar A3 .
until the motor unit A7 cools down.
