757124
10
Zoom out
Zoom in
Vorherige Seite
1/18
Nächste Seite
10 EN
EN
Revision 06/2021Copyright © 2021, Fast ČR, a. s.
Device and controls
Press REC/OK again to stop recording, the icon and indicators no longer flash.
Note: if the screen is off in the Power saving mode, the first press of abutton
turns it on, and only second press performs the desired action.
During recording, you can turn off/on the audio recording by pressing DOWN
(crossed-out microphone icon), press MENU to lock the file for storage. The device
settings cannot be adjusted during an active recording process. The files have the
same size, determined by loop length and resolution. For example 3 min 720P
has 280 MB, 5 min 1080FHD has 600 MB. Shorter loops are recommended.
Parameter settings (MENU)
Press MENU once to navigate to mode setup, twice to access device settings.
Press again to exit both modes back to operating mode. The OK button is used to
confirm options, select UP/DOWN, confirm again and return by pressing OK.
Resolution: 1080P (1920×1080, 30 fps), 720P (1280×720, 30 fps), 1296P
(1720×1296, 30 fps)
Loop: 1 min/5 min/10 min – the duration of each segment in asingle file
before anew file is created.
Delayed recording: Off/100 ms/200 ms/500 ms – Recording (still image/
photo) is captured after the selected time and played as avideo
High Dynamic Range: Off/On – recording with higher dynamics in the
picture
Exposure: -3...0...+3 – correction of light in the scene
Motion detection: Off/On – the recording automatically turns on only when
there is alarge move ascene (car movement), and stops for automatically
after about 1 minute.
Audio recording: Off/On – audio from the cabin is recorded via integrated
microphone only if Audio is enabled.
Time stamp: Off/On – the system date and time is recorded to the video if
this option is enabled. Do not forget to set the date and time!
G-Sensor: Off/Low/Medium/High – based on the configured sensitivity,
the integrated accelerator ensures the given file is locked against being
automatically deleted when alimit value is exceeded (shock, accident).
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SCR 5000GS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info