- 10 - 09/2020
Copyright © 2020, F
EN Dehumidifier
User'smanual
Prior to using this appliance, please read the user's
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’
Keep this user'smanual in asaf
We rec
receipt and responsibility statement of the vendor or warran
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original bo
from the manufacturer
DESCRIPTION OF
A1 Control panel
A2 Handles (on both sides)
A3 Air outlet grille
A4 Condensate tank
A5 Viewing window
A6 Drain hose connection outlet
A7 Travel wheels
A8 Air inlet grille
A9 Air filter (located behind agrille)
A10 Power cor
storage)
DESCRIPTION OF
B1 On/Off button
B2 MODE button (for selecting an
operating mode)
B3 Plus (+) button
B4 Minus (-) button
B5 F button (fan speed control)
B6 TIMER button (timer control)
B7 Timer indicator light
B8 Low fan speed indicator lights
B9 Medium fan speed indicator lights
B10 Display
B11 F
B12 Drying mode indicator light
B13 Continuous dehumidification mode
indicator light
B14 Smart dehumidification mode
indicator light
B15 Po
BEFORE FIRST USE
Before first use, take the appliance and its acc
and remove all promotional labels and stickers
any of its parts is damaged.
Note:
TrA7 may be removed on certain models. Screw the trav
wheels to the underside of the appliance prior to using it.
Do not travel over carpets, thr
wheels.
Do not move the appliance when the condensate tank is full.
Certain models may also be supplied without travel wheels A7 .
Installing the power cor
When planning on not using the appliance and preparing to store it, install the
holder that serves to conveniently store the po
Insert the holder into the cut-out at the rear of the appliance.
INST
Locate the appliance on an even, dry and stable surface within reach of aproperly
grounded power socket.
Do not use the appliance outdoors.
T
of the appliance.
Locate the appliance in a room where temperature does not fall below 5 °C. If
the temperature were t
appliance, which would reduce its efficiency
Do not locate the appliance in the vicinity of dryers, heating devices and other
sources of heat.
Use the appliance in locations where humidity could damage books or other
valuable items.
The appliance must be used in a closed room in order to ensur
effectiveness.
OPERA
The dehumidifier is used for drying out, for example, flooded basements, r
with an increased level of moisture, et
items are stored requiring pr
If using the appliance for the first time, it is important to allow it to run continuously
for 24 hours.
Use the appliance at an ambient temperature in the r
and humidity in the range 30%-80%.
Always wait at least 3 minutes bef
Do not connect the appliance to a power socket to which another appliance is
already connected.
circuit.
Make sure that the condensate tank is correctly installed in the appliance, otherwise
the appliance may not function correctly.
OPERA
Make sure that the appliance is located in a
assembled.
T
Press button B1 to turn on the applianceB15 will turn on. In order to
turn off the appliance, press button B1 again.
Note:
When the appliance is turned on or off, the compr
anoise.
The appliance will turn off automatically if the condensate tank A4 is full or
incorrectly installed.
If you turn the appliance off and then need to turn it on again quickly thereafter
appliance will start again after approximately 3minutes. This function protects the
compressor against damage.
The appliance is equipped with an automatic restart function (AUT
for the event of apower outage. Settings will remain stored in the memory of the
appliance, and after power is rest
previously set mode.
When you have finished using it, turn off the appliance and disconnect the pow
cord from the power socket.
Display
Depending on the selected mode, the display A10 shows: set humidity in %,
automatic start / shut-off time, current humidity in % (+/- 5
- 90% relative humidity).
Selecting an operating mode
TMODE B2 . Repeatedly press this
button to select from the following modes: dehumidification, drying, continuous
dehumidification or smart dehumidification.
■Dehumidification mode: in this mode, set the required humidity using the +/-
buttons. No indicator light will be lit.
■Drying mode: indicator light B12 will be lit when the drying mode is ac
this mode, fan speed is automatically set to high and it is not possible to change it.
It thereby ensures maximum effectiveness. It is important that this mode is used
in a
effectiveness, spin dry the laundry in awashing machine. P
the air outlet is directed at the laundry from adistance of 30 – 50 cm. Drying results
on thick and heavy laundry may not always be satisfactory.
Warning:
Do not cover the air outlet with laundry.
appliance overheating, afire hazards or damage to the unit. Do
not place wet laundry above the appliance or allow water to drip
from the laundry on to the appliance.
electrical shock, potential to electrical wiring or damage to the
appliance.
■Continuous dehumidification mode: indicator light B13 will be lit when the
continuous dehumidification mode is activated. In this mode, the appliance runs
continuously until the condensate tank A4 is completely full of c
■Smart dehumidification mode: indicator light B14 will be lit when the smart
dehumidification mode is activated. In this mode, the appliance automatically
detects the humidity in the room and maintains it in the optimal range of 45
-
humidity.
Setting the humidity
Use buttons +/- to set the required humidity in the range 35% - 85
humidity). Each time abutton is pressed, the value will increase or decrease by 5%.
The set humidity will be shown on the display B10 .
Setting fan speed
Button F serves to set the fan speed: low (indicator light B8 will be
lit)B9 will be lit) – high (both indicator lights B8 andB9
will be lit).
For maximum dehumidification speed, set the fan t
fan to be more quiet or if humidity has declined, set the medium or slow fan speed.
Setting an automatic start
While the appliance is turned off, prTIMER B6 button. Use buttons +/- to
set the time after which the appliance will turn on automatically.
from 30 minutes to 24 hours, initially in 30-minute incr
then in 1-hour increments.
The set time is automatically saved to memory after approximately 5 sec
Automatic shut-off function
While the appliance is turned on, press the TIMER B6 button. Use buttons +/- to
set the time after which the appliance will turn off automatically.
from 30 minutes to 24 hours, initially in 30-minute incr
then in 1-hour increments.
The set time is automatically saved to memory after approximately 5seconds and
the display B10 will show the set humidity.
