- 13 - 09/2020 Copyright © 2020, F
A
of a leak, the system must be tested after being refilled but also before being put in
operation. Av
9. T
Prior to performing this procedure it is essential that the technician fully acquain
him/herself with the device and all its particulars. Correct practice of safely collecting
all refrigerant is recommended. P
samples must be taken if an analysis is required prior to using the using the regenera
refrigerant for the first time. It is essential that prior to starting this activity that electricity
is available.
a)
b) Electrical disconnection of the system.
c)
–
–
–
–
d) Pump out the cooling system if possible
e)
collection of refrigerant from various parts of the system.
f Ensure that the cylinder is placed on the scale before the collection of refrigerant is
started.
g)
h) Cylinders are not ov
i) The maximum operating pr
j) When the cylinders are properly filled up and the procedure is c
the cylinders and devices are immediately removed from the installa
that all the separation valves on the device are closed
k)
cleaned and checked.
10. Marking with alabel
The appliance must be marked with a
operation and is without refrigerant.
that there are labels on the appliance indicating that it con
11. Collection
When the refrigerant is collected from the system, either due to servicing or when
it is put out of operation, it is recommended to adhere t
collect all the refrigerant.
When the refrigerant is transferred in
appropriate cylinders for collecting refrigerant are used.
It is necessary to ensure that there is asufficient number of cylinders available to contain
the complete contents of the syst
intended for collecting refrigerant and be marked with alabel for this refrigerant (i.e.
special cylinders for collecting refrigerant). T
valve and associated closing valves in good w
cylinders are pumped empty and if possible cooled prior to collecting refrigerant.
The collection device must be in good operating condition with a
to the device, which are on hand and it must be suitable f
refrigerants. Apart from this, a
also be available. Hoses must be complete with couplers without seepage and in good
condition. Prior to using the collection device, check that it is in satisfactory operating
condition, has been properly maintained and all the associated electrical components
are sealed to prevent ignition in the ev
consult the manufacturer
The collected refrigerant must be returned to the r
collection cylinder and with arespectively arranged waste transport letter. Refrigerant
are not to be mixed in the collection units and especially not in the cylinders.
In the event that compressors or compressor oils ar
are pumped out to an acceptable level in or
does not remain in the lubricant.
the compressor is returned to the supplier
heated compressor elements may be used
must be disposed of safely
TECHNICAL SPECIFICA
Power supply 220-240V~50Hz
Dehumidification capacity 30l/24h
Rated input power 715W
Rated current 3.2A
Energy factor EEV 2.2l/kWh
Starting current 11.0A
Fuse type and current value T3.15A
Condensate tank capacity 3l
Refrigerant type and weight R290/100g
GWP (global warming potential) 3
Equivalent CO2 0.0003 tons
Air flow volume 191/166m3 /h (high / normal fan speed)
Noise level 59/48.5dB(A) (high / normal fan speed)
Dimensions 386×260×500mm
Weight net / gr 17 / 18.2kg
Operating temperature 5 - 32°C
Recommended room area 58 - 73m2
The declared noise emission level of the appliance is 59
Aof acoustic power with respect to aref
We reserve the right to change text and technical specifications
INSTRUCTIONS AND INFORMA
DISPOSAL OF USED P
Dispose of used packaging material at asite designated f
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used electric
or electronic products must not be added to ordinary municipal waste.
For proper disposal
to determined collection points. Alternatively
states or other European countries you ma
the local retailer when buying an equivalent new appliance.
Correct disposal of this product helps save valuable natural resour
and prevents potential negativ
health, which could result from improper waste disposal
collection facility for more details.
In accordance with national regulations penalties may be imposed f
disposal of this type of waste.
For business entities in Eur
If you want to dispose of electric or electronic appliances, ask your retailer or supplier
for the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer
This product meets all the basic requirements of EU directives rela
it.
