759932

Sencor SFH 7020 Seite 6

6
Zoom out
Zoom in
Vorherige Seite
1/7
Nächste Seite
- 6 - 10/2019
Copyright © 2019, Fast ČR, a.s.
EN Hot Air Fan Heater
User'smanual
■ Prior to using this appliance, please read the user’smanual
thoroughly, even in cases where you have previously
familiarised yourself with the operation of similar types of
appliances. Only use the appliance in the manner described
in this user’smanual. Keep this user’smanual in asafe place
where it can be easily retrieved for future use.
■ We recommend saving the original cardboard box,
packaging material, purchase receipt and responsibility
statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we recommend
that you pack the appliance in the original box from the
manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Power indicator light
A2 Temperature control knob
A3 Turn switch for starting
just the fan,
for setting the power
level Ior II
and for turning off the
appliance.
A4 Air outlet grill
A5 Fan and heating elements
These parts are hidden
underneath the grill.
A6 Integrated carry handle
(not shown)
it is located at the rear of
the appliance.
A7 Air inlet grill
(not shown)
it is located at the rear of
the appliance.
OPERATING THE APPLIANCE
■ Before first use, remove all packaging materials including
promotional stickers and labels from the appliance.
■ Locate the appliance in a suitable location in accordance
with the safety instructions. Make sure that the inflow or
outflow vents A7 or A4 are not blocked, that the temperature
control knob A2 is set to minimum and the switch A3 is in
position 0 (off). Connect the appliance to a power socket.
After connecting the appliance to apower socket, indicator
light A1 will be lit.
1. SETTING AN OPERATING MODE
■ Set the temperature control knob A2 to maximum and select
the desired operating mode using switch A3.
Setting switch A3 Description of operating mode
0O
Air ventilation without heating.
Only the fan is running. Heating
elements are turned o.
I
Power is set to alow level (1 200 W).
The fan and one of the two heating
elements are running.
The heating element heats the air
and the fan ensures its ow into
the room.
II
Power is set to ahigh level (2 000
W). The fan and both the heating
elements are running. The heating
elements heat the air and the fan
ensures its ow into the room.
Note:
Upon first use or after it has not been used for an
extended period of time, aslight odour may be sensed
from the appliance. This is completely normal and will
quickly disappear.
2. TEMPERATURE CONTROL KNOB SETTING
■ The appliance is equipped with athermostat that serves to
maintain the desired temperature in the room.
■ To heat up the air in the room as fast as possible, set switch
A3 to the high power level and the temperature control
knob A2 to maximum. When the desired temperature has
been reached, slowly turn the temperature control knob A2
anticlockwise until you hear aclick. The set thermostat will
automatically switch the fan and heating elements A5 on
and off to maintain the desired temperature.
3. TURNING OFF
■ When you have finished using it, set the temperature
control knob A2 to minimum, set switch A3 to position 0
(off) and disconnect the power cord from the power socket.
After disconnecting the appliance from the power socket,
indicator light A1 will turn off. Allow the appliance to cool
down.
AUTOMATIC SHUT-OFF FUNCTION
■ The appliance is equipped with a safety mechanism that
automatically turns it off when it is accidentally knocked
over. After returning the appliance back to the operating
position, it will start running again.
THERMAL PROTECTION
■ The appliance is equipped with athermal fuse that turns it
off upon overheating. Should such a situation occur, turn
the appliance off and disconnect it from the power socket.
Make sure that the air inlet and outlet openings A7 or A4
are not blocked. Allow the appliance to cool down before
attempting to put it back into operation as this will give the
thermal fuse time to reset.
■ If you are unable to put the appliance back into operation,
contact an authorised service centre.
CLEANING AND MAINTENANCE
■ Before cleaning it, make sure that the appliance is turned off
and disconnected from the power socket. If the surface of
the appliance is hot, allow it to cool down.
■ Use a dry or lightly dampened wiping cloth to clean the
surface of the appliance. Then thoroughly wipe everything
dry. Dust that has settled inside the appliance can be
vacuumed out using avacuum cleaner through the air inlet
and outlet grills A7 and A4.
■ For cleaning, do not use cleaning products with an abrasive
effect, solvents, etc. Otherwise, outer surface of the
appliance may be damaged. Do not submerge the appliance
or its power cord in water or any other liquids.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SFH 7020 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info