Bedienungsanleitung Sencor SFH 7057 (Seite 5 von 6) (Englisch)

759935

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

- 5 - 04/2020

EN Hot Air Fan Heater

User'smanual

■ Prior to using this appliance, please read the user’smanual thoroughly, even in cases where you have previously familiarised yourself with the operation of similar types of

appliances. Only use the appliance in the manner described in this user’smanual. Keep this user’smanual in asafe place where it can be easily retrieved for future use.

■ We recommend saving the original cardboard box, packaging material, purchase receipt and responsibility statement of the vendor or warranty card for at least the duration of

the legal liability for unsatisfactory performance or quality. In the event of transportation, we recommend that you pack the appliance in the original box from the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 Power indicator light

A2 Temperature control knob

A3 Turn switch for starting just the fan,

for setting the power level 1 or 2

and for turning off the appliance.

A4 Air outlet grill

A5 Fan and heating elements

These parts are hidden underneath the grill.

A6 Integrated carry handle

(not shown)

it is located at the rear of the appliance.

A7 Air inlet grill

(not shown)

it is located at the rear of the appliance.

A8 Oscillation toggle switch

OPERATING THE APPLIANCE

■ Before first use, remove all packaging materials including promotional stickers and labels from the appliance.

■ Locate the appliance in asuitable location in accordance with the safety instructions. Make sure that the inflow or outflow vents A7 or A4 are not blocked, that the temperature

control knob A2 is set to minimum and the switch A3 is in position 0 (off). Connect the appliance to apower socket. After connecting the appliance to apower socket, indicator

light A1 will be lit.

1. SETTING AN OPERATING MODE

■ Set the temperature control knob A2 to maximum and select the desired operating mode using switch A3.

Setting switch A3 Description of operating mode

0 Off

Air ventilation without heating. Only the fan is running. Heating elements are turned off.

1Power is set to alow level (1 000 W). The fan and one of the two heating elements are running.

The heating element heats the air and the fan ensures its flow into the room.

2Power is set to ahigh level (2 000 W). The fan and both the heating elements are running. The heating elements heat the air and the fan

ensures its flow into the room.

Note:

Upon first use or after it has not been used for an extended period of time, aslight odour may be sensed from the appliance. This is completely normal and will quickly

disappear.

2. TEMPERATURE CONTROL KNOB SETTING

■ The appliance is equipped with athermostat that serves to maintain the desired temperature in the room.

■ To heat up the air in the room as fast as possible, set switch A3 to the high power level and the temperature control knob A2 to maximum. When the desired temperature has

been reached, slowly turn the temperature control knob A2 anticlockwise until you hear aclick. The set thermostat will automatically switch the fan and heating elements A5 on

and off to maintain the desired temperature.

3. OSCILLATION FUNCTION

■ Setting the switch A8 to position Iwill turn on the oscillation function. The hot air fan heater will automatically turn from side to side. To turn off oscillation, set the switch A8 to

position 0. This function is only available on model SFH 7057WH.

4. TURNING OFF

■ When you have finished using it, turn off the oscillation function (only on model SFH 7057WH), set the temperature control knob A2 to minimum, set switch A3 to position 0 (off)

and disconnect the power cord from the power socket. After disconnecting the appliance from the power socket, indicator light A1 will turn off. Allow the appliance to cool down.

AUTOMATIC SHUT-OFF FUNCTION

■ The appliance is equipped with asafety mechanism that automatically turns it off when it is accidentally knocked over. After returning the appliance back to the operating

position, it will start running again. We recommend waiting 5 - 10 minutes before the appliance cools down.

THERMAL PROTECTION

■ The appliance is equipped with athermal fuse that turns it off upon overheating. Should such asituation occur, turn the appliance off and disconnect it from the power socket.

Make sure that the air inlet and outlet openings A7 or A4 are not blocked. Allow the appliance to cool down before attempting to put it back into operation as this will give the

thermal fuse time to reset.

■ If you are unable to put the appliance back into operation, contact an authorised service centre.

CLEANING AND MAINTENANCE

■ Before cleaning it, make sure that the appliance is turned off and disconnected from the power socket. If the surface of the appliance is hot, allow it to cool down.

■ Use adry or lightly dampened wiping cloth to clean the surface of the appliance. Then thoroughly wipe everything dry. Dust that has settled inside the appliance can be

vacuumed out using avacuum cleaner through the air inlet and outlet grills A7 and A4.

■ For cleaning, do not use cleaning products with an abrasive effect, solvents, etc. Otherwise, outer surface of the appliance may be damaged. Do not submerge the appliance or

its power cord in water or any other liquids.

Sencor SFH 7057 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info